I'm having some issues with a 5.0 to 6b12 upgrade.  I got logged in, but when I try to assign my drives to their spots (parity, data, cache) and start the array nothing happens.  I can't start it in maintenance mode, and the log is empty.

 

Any ideas?

This is what I see on the Array Operation screen:

 

And I made sure to assign the correct drives to the array, parity, and cache.

Ok, solved that problem.  I had forgotten to copy over the old 'config' folder to the flash drive.

 

Now I have a new issue though.  I still can't start the array, and it seems to be due to the 'Unclean shutdown detected' message.  I have cleanly shut down and restarted the system from the management page, but to no avail.  How do I clear this error?  Trying to start the array in maintenance mode doesn't work either.  All of the discs have green status lights.

I Have the same issue. How did you resolve this?

 

Thank you!

Goto plugins tab and check for updates, make sure everything is up to date.

 

Sometimes on an unclean shutdown with me, it seems to be unresponsive for a few mins and then it will finally start up and showing the parity sync running.  Try the update and try again and be patient.

 

Let us know!  Good luck

Thank you.

 

I updated Dynamix webGui plugin and waiting ... Still nothing. Have to leave for work now, will keep the unit on.

 

edit: attached file from the log.

edit2: I misplaced the prokey file, it works now, but unRAID crashes. Need to do some more troubleshooting.

 

syslog.txt

Do you have any plugins or customer software?

 

Try running in safe mode.

Post a complete syslog