Jump to content

FA: Areca 1200 2-port PCIE x1 SATA Controller card, brand new


heffe2001

Recommended Posts

http://www.ebay.com/itm/areca-ARC-1200-2-Port-PCI-Express-x1-SATA-Controller-Card-/151649601937?

 

Asking 130 buy-it-now, or bid at 99.99.  Still brand new in box, not installed or powered on.  Comes with all accessories that were included with it (both profile brackets, both sata cables, books and disk, plus box).  Bought it to make a raid0 parity setup, but ended up going with a 1231ML and replacing one of my MV8 cards in that machine (out of x1 ports on my board, so had to go that route).  I'm just out of return time from Newegg, so my loss is your gain.

 

For completeness-sake, I'm located in the US.

 

 

 

 

Link to comment
  • 2 weeks later...

http://www.ebay.com/itm/areca-ARC-1200-2-Port-PCI-Express-x1-SATA-Controller-Card-/151649601937?

 

Asking 130 buy-it-now, or bid at 99.99.  Still brand new in box, not installed or powered on.  Comes with all accessories that were included with it (both profile brackets, both sata cables, books and disk, plus box).  Bought it to make a raid0 parity setup, but ended up going with a 1231ML and replacing one of my MV8 cards in that machine (out of x1 ports on my board, so had to go that route).  I'm just out of return time from Newegg, so my loss is your gain.

 

For completeness-sake, I'm located in the US.

 

I have one of these running in my PROD array providing a RAID0 parity. Although pricey for a 2 port card, when an 8 port card can be had for a little bit more, it is nice to be able to leverage the PCIe x1 slot for such a useful purpose, and rely on a more traditional HBA as your primary controller filling your fast and wide PCIe slots.

Link to comment

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...