About to give up on UNRAID :(

[Darkun1]

Try assigning your threads to the screenshot and add the <emulatorpin cpuset='0,4'/> to the VM templet. In my screenshot give orange to UNRAID, then yellow to VM1 and green to VM 2 and see how that goes. That should provide 3 physical cores for your VM's to use though may not be enough depending on what you are wanting to do. I believe you have but if not you will want to add isolcpus=1,2,3,5,6,7 to your Syslinux configuration to tell UNRAID not to use those threads so the VM's have full access to them.

 

If you are still having issue I would try the same thing but take both of your SSD out of UNRAID cache and place them back under the unassigned devices and edit the VM templet for SSD pass-through. My two gaming VM's SSD pass-through look like this in my VM templet.

 

VM1 = /dev/disk/by-id/ata-Crucial_CT525MX300SSD1_163313AAD0A9

 

VM2 = /dev/disk/by-id/ata-Crucial_CT525MX300SSD1_163313AAB5EE

[machineshake123]

Try assigning your threads to the screenshot and add the <emulatorpin cpuset='0,4'/> to the VM templet. In my screenshot give orange to UNRAID, then yellow to VM1 and green to VM 2 and see how that goes. That should provide 3 physical cores for your VM's to use though may not be enough depending on what you are wanting to do. I believe you have but if not you will want to add isolcpus=1,2,3,5,6,7 to your Syslinux configuration to tell UNRAID not to use those threads so the VM's have full access to them.

 

If you are still having issue I would try the same thing but take both of your SSD out of UNRAID cache and place them back under the unassigned devices and edit the VM templet for SSD pass-through. My two gaming VM's SSD pass-through look like this in my VM templet.

 

VM1 = /dev/disk/by-id/ata-Crucial_CT525MX300SSD1_163313AAD0A9

 

 

VM2 = /dev/disk/by-id/ata-Crucial_CT525MX300SSD1_163313AAB5EE

 

Hi, I would like to try this, how did you pass through the SSD? Does that mean I will have to do a reinstall (I am assuming vdisk image won't work?)? Could you please show me the passthrough section of your template.

 

Thanks