January 31, 20179 yr All, Running unRAID Plus 6.2.2. Prior to version 6, I used to run preclear via the command line and became accustomed to the report which included sector allocation messages. Now, with the plugin, I am seeing very different report on a new 3TB WD red drive: ############################################################################################################################ # # # unRAID Server Preclear of disk /dev/sdh # # Cycle 1 of 1, partition start on sector 64. # # # # # # Step 1 of 5 - Pre-read verification: [7:20:25 @ 113 MB/s] SUCCESS # # Step 2 of 5 - Zeroing the disk: [7:22:30 @ 113 MB/s] SUCCESS # # Step 3 of 5 - Writing unRAID's Preclear signature: SUCCESS # # Step 4 of 5 - Verifying unRAID's Preclear signature: SUCCESS # # Step 5 of 5 - Post-Read verification: [7:20:22 @ 113 MB/s] SUCCESS # # # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 22:03:33 | Total elapsed time: 22:03:34 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status default # # # # # # ATTRIBUTE INITIAL CYCLE 1 STATUS # # 5-Reallocated_Sector_Ct 0 0 - # # 9-Power_On_Hours 67 89 Up 22 # # 194-Temperature_Celsius 26 28 Up 2 # # 196-Reallocated_Event_Count 0 0 - # # 197-Current_Pending_Sector 0 0 - # # 198-Offline_Uncorrectable 0 0 - # # 199-UDMA_CRC_Error_Count 0 0 - # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ --> ATTENTION: Please take a look into the SMART report above for drive health issues. --> RESULT: Preclear Finished Successfully!. Does this look like a good report? Am I missing something with the new plugin? Wondering if I'm running it correctly..... Larry
January 31, 20179 yr Author The report looks fine. Thanks for the reply. Can you explain how the new report accounts for the deep inspection that the old report accounted for? This one just seems to be at such a high level it makes me wonder...
January 31, 20179 yr The important SMART parameters are all there at the bottom. All the rest are available via the web GUI. The more technical stuff (such as partition information) isn't displayed because it isn't really relevant. I suppose you could say that the display has been dumbed down a little but everything you really need is there and clearly shown. Incidentally, the plugin comes with and uses by default the plugin author's own fast script but if you want to you can download and install the original and you can then choose either from a menu.
Archived
This topic is now archived and is closed to further replies.