February 26, 20179 yr Hi there, Hope anyone can help me with my problem. I'm trying to Pass Through a onboard SATA Controller to a VM. I'm using the latest Stable Unraid version and a VM with SeaBios. The adres of my Marvell controller is: [RESET] 08:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] (rev 11) So I added the folowing to my VM xml file: <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x08' slot='0x00' function='0x0'/> </source> </hostdev> But when I boot the VM it only gives me the following 2 lines for about 10 seconds: See picture. After that the screen goes black… Does anyone know what I am doing wrong? A Intel Sata controller is being used for the Unraid harddisks.
February 26, 20179 yr Author I was wrong. It still boots the VM but it takes about 20 minutes to do so. Plus it is verrrrrry slow.... anyone knows why this is?
February 26, 20179 yr Warning for you. My ASRock - EP2C602-4L/D16 has a Marvel 9230 controller. I passed it through to my WHSv1 VM for quite a while but I stopped because I got tired of having to restart the WHOLE box not just the VM when the drives were dropped from the controller due to the Marvel/unRAID 6 bug. I've since switched to the 4 port Intel controller and haven't had a dropped drive since. Also like you have noticed it took a long time to boot. You can try some of the things mentioned below but I had no luck myself. Bug:
February 27, 20179 yr Author 16 hours ago, BobPhoenix said: Warning for you. My ASRock - EP2C602-4L/D16 has a Marvel 9230 controller. I passed it through to my WHSv1 VM for quite a while but I stopped because I got tired of having to restart the WHOLE box not just the VM when the drives were dropped from the controller due to the Marvel/unRAID 6 bug. I've since switched to the 4 port Intel controller and haven't had a dropped drive since. Also like you have noticed it took a long time to boot. You can try some of the things mentioned below but I had no luck myself. Bug: Thanks for this. I have the ASROCK EP2C602 so this must be related. I'll try to update the Marvell software. If that does not work I will folow your lead and pass through a different controller. Tnx! I'll let you know what happens.
March 7, 20179 yr Author Unfortunally it seems like it does boot after a few minutes. But the machine hangs sometimes for half a minute before it responds again. Don't know how but I don't have this error when I just pass through the harddisks on their own. Strange??? Or just Marvell??
Archived
This topic is now archived and is closed to further replies.