Hi,

 

I just connected my UPS to my server. It uses a USB connection.

 

According to this page the UPS should be supported by APCUPSD using the blazer_usb driver

 

http://networkupstools.org/ddl/Sweex/INTELLIGENT_UPS_1500VA_P220.html

 

Currently i'm getting Lost communication with USB cable & type set to USB.

According to the lsusb it's on  Bus 003 Device 006: ID 0665:5161 Cypress Semiconductor USB to Serial, I've included the details.

Any help would be appreciated 

 

Quote

Bus 003 Device 006: ID 0665:5161 Cypress Semiconductor USB to Serial
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0665 Cypress Semiconductor
  idProduct          0x5161 USB to Serial
  bcdDevice            0.02
  iManufacturer           1 INNO TECH
  iProduct                2 USB to Serial
  iSerial                 3 20100813
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          3 20100813
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              4 Sample HID
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      27
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              32
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)
 

 

Edited October 7, 20178 yr by spirituality

16 minutes ago, spirituality said:

According to this page the UPS should be supported by APCUPSD using the blazer_usb driver

 

http://networkupstools.org/ddl/Sweex/INTELLIGENT_UPS_1500VA_P220.html

 

The page you linked to is from Network UPS tools, not APCUPSD.  You should install the Nut plugin and set it to be blazer_usb

For some reason I had the (possibly/probably dumb) idea that APCUPSP was the same as NUT.

 

Got it up and running ! Thanks !