NY152 Posted December 28, 2017 Share Posted December 28, 2017 Hello, I'm trying to install OpenElec correctly but I'm in trouble. I do not have sound (well, but something very expensive and innodible) With lspci, I have this for my graphics card: 03:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd GM107 [GeForce GTX 750 Ti] Flags: bus master, fast devsel, latency 0, IRQ 39, NUMA node 0 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fb000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Legacy Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [250] Latency Tolerance Reporting Capabilities: [258] L1 PM Substates Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] #19 Kernel driver in use: vfio-pci 03:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1) Subsystem: Gigabyte Technology Co., Ltd Device 3681 Flags: bus master, fast devsel, latency 0, IRQ 37, NUMA node 0 Memory at fb080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: vfio-pci MSI mode is on the video part (MSI: Enable +) but not on the audio part (MSI: Enable-) In the .config / modprobe.d / sound.conf file I already have: options snd-hda-intel enable_msi=1 Strange in my opinion because for my video card we should speak of nvidia not intel no? If anyone can help me, it would be nice Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.