Gigabyte GA-H370M D3H Bios Setting for UEFI Gui Boot

[PeteB]

Just upgraded my server and used a Gigabyte GA-H370M D3H motherboard.

 

I have UEFI boot enabled and boot into GUI Mode.

 

With default BIOS settings it boots but won't start the GUI. It just sits there with a flash underscore at the top left hand side of the screen.  This is with CSM Disabled. Note that behind the scenes everything is working correctly it's just the GUI not working.

 

Settings required to get it to boot into the GUI correctly are:

 

* CSM Support - Enabled

  * LAN PXE Boot Options ROM - Disabled

  * Storage Boot Options Control - UEFI

  * Other PCI devices - UEFI

 

Hope this helps if you have the same motherboard. Note: All bets are off if you don't use UEFI boot as I haven't tested Legacy boot.