Fixed an issue with my setup not booting correctly (or sometimes not booting at all) but now have an issue with the IP settings with the server. I have the server connected to a switch and then in turn connected to the modem/router. The switch can see activity on the port the server is attached to but the modem/router only says there is one device connected via Ethernet (presumably my Desktop). When the server is booted, the IP address it says it has is 169.254.210.68, but my home lan has 10.1.1.x. I have tried to set a static IP address in both the router/modem and within unraid to set it to 10.1.1.31, but even when it says that is the IP address I still cannot get WebGUI or have more than 1 device show up in the modem/router. I have tried different ports on the server (1 onboard + 4 port NIC), editing the network.cfg file and deleting both the network.cfg and network-rules.cfg and rebooting, all to no avail. I have attached the diagnostics from the server. Any help would be greatly appreciated.

lambda-diagnostics-20191201-1311.zip

eth0 is the NIC used for management, it's currently the onboard NIC and it's detecting a link but not getting an IP address, this is usually a router problem, you can also try using one of the Intel NICs as eth0, that can be changed by booting with the GUI mode then using the local browser to go to Settings -> Network Settings -> Interface rules, reboot required after change.