Justin Yu Posted January 10, 2020 Share Posted January 10, 2020 (edited) Hello everyone, I am fairly new to unraid and virtualization. Currently, I have been having troubles with vms booting with a gt710. Whenever I start a vm this comes up. internal error: qemu unexpectedly closed the monitor: 2020-01-10T05:35:14.681545Z qemu-system-x86_64: -device vfio-pci,host=04:00.0,id=hostdev0,bus=pci.0,addr=0x5,romfile=/mnt/disk1/domains/vbios/gt710.dump: vfio 0000:04:00.0: failed to setup container for group 13: failed to set iommu for container: Operation not permitted Here is my system info Model: Custom M/B: Dell Inc. 0F0XJ6 Version A01 - s/n: ..CN7016304600BC. BIOS: Dell Inc. Version 6.6.0. Dated: 05/22/2018 CPU: Intel® Xeon® CPU E5645 @ 2.40GHz HVM: Enabled IOMMU: Enabled Cache: 192 KiB, 1536 KiB, 12288 KiB, 192 KiB, 1536 KiB, 12288 KiB Memory: 32 GiB DDR3 Multi-bit ECC (max. installable capacity 192 GiB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mbps, full duplex, mtu 1500 eth1: interface down eth2: interface down eth3: interface down Kernel: Linux 4.19.56-Unraid x86_64 OpenSSL: 1.1.1c Whenever I start it using vnc, it is fine. I figured it out now. For the other noobs out their like me, for you to run a vm with gpu passthrough, you need two gpus. Edited January 31, 2020 by Justin Yu Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.