rabidduck Posted April 22, 2020 Share Posted April 22, 2020 (edited) My parity drive was marked as faulty that was only a year old, and no idea how long it's actually been faulty, as I don't check the webUI often. So I took array offline, unassigned parity, and restarted array to it would forget the parity to try and rebuild. However now the drive isn't even an option to select in the menus, is it toast or am I missing some other option? If it's helpful I did a lshw -class disk in the terminal and the disk isn't there either Also a side question since I've never thought about this until now, if the drive is indeed toast how do I physically know which one it is? My drives are both the same brand/size so not actually sure how to physically ID it. https://easyupload.io/vbs7sb Also here is a download of the Diag files Edited April 22, 2020 by rabidduck Quote Link to comment
itimpi Posted April 22, 2020 Share Posted April 22, 2020 Unraid tracks drive by serial number so make sure you have a screenshot available of the Main tab that shows the current good drive. have you power cycled the server? Sometimes this is necessary to make a drive that has dropped offline visible again. If the drive is not visible after a power cycle I would say it is almost certainly dead (unless a cable for power/SATA to the drive has come loose). have you made sure that you have Notifications enabled as if so you should have got an email telling you about the problems with the parity drive? Quote Link to comment
rabidduck Posted April 22, 2020 Author Share Posted April 22, 2020 Thanks I ended up taking the drive out and testing it in a docking station to see if it would show up, the drives spins but but never shows up, guess it's time for an RMA ;[ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.