November 5, 20205 yr Hello, i have the following problem. I moved from an HP Microserver to an Dell T7600 with two Xeons and two GPU's. i set the BIOS to UEFI boot an booted the first time very quick from Unraid-USB-Stick and could start the system again. So thanks for these simple solution for moving to new hardware. I have an external HDD where some rsync Backups point to. In the Microserver it was not the Problem if i rebooted. But if i leave the HDD atached and reboot on the new System he says that there is no boot device found. I played a little around with the BIOS - enabled/disabled AHCI, USB Ports, etc. but nothing helped. Can someone point me in the right direction? thanks in advance Chris _____________________________________________________ Here are some Informations about my Host: Model: N/A M/B: Dell Inc. 082WXT Version A01 - S/N: BIOS: Dell Inc. Version A17. Dated: 06/30/2019 CPU: Intel® Xeon® CPU E5-2643 0 @ 3.30GH HVM: Aktiviert IOMMU: Aktiviert Cache: 256 KiB, 1024 KiB, 10240 KiB, 256 KiB, 1024 KiB, 10240 KiB Arbeitsspeicher: 32 GiB DDR3 Multi-bit ECC (maximal installierbar 512 GiB) Netzwerk: bond0: transmit load balancing, mtu 1500 eth0: 1000 Mbps, full duplex, mtu 1500 eth1: 1000 Mbps, full duplex, mtu 1500 Kernel: Linux 5.8.13-Unraid x86_64 OpenSSL: 1.1.1h Edited November 6, 20205 yr by cmeyer86
Archived
This topic is now archived and is closed to further replies.