[6.11.0] No space left on device

The unraid-api crashing is another symptom of the problems, not the cause.

 

The "wrong csrf_token" messages in the log mean you have another window/tab open somewhere that needs to be closed.

 

Open a web terminal (or use SSH, or a local keyboard/mouse) and type "diagnostics".  Note the path on the flash drive where it writes the zip file, you can either access it over the network or you can shutdown and put the flash drive in another computer to upload the diagnostics zip file here.

By that point in the logs (the first occurrence of csrf token), unraid had already caught fire, so to speak. I had a couple of tabs open on the same machine after seeing all of the issues. Closing all of them and starting afresh stopped any further csrf warnings but didn't predate the 'undetermined' state of the array, nor the vanishing disks on the dashboard/main tabs.

 

I'll have to wait for it to happen again, unfortunately 😭 I rebooted so that I could be sure all of my overnight actions would run successfully (appdata & usb backup, mover, trim, etc.) Completely forgot about manual diagnostics via SSH 🤦‍♀️ it's been a long while since anything has gone horribly wrong 😅 which is a silver lining I suppose!

 

It's happened again 👀

 

We can rule out csrf_token as the cause too, that's another symptom of the problem, it would seem 😰

 

• Typing diagnostics command runs but it's very upset (output & ZIP attached... It's just empty files because nothing can be written to the destination).
• Lots of mentions of smbd & NT_STATUS_DISK_FULL
  • The boot USB has 745MB used, so that's not full
  • Memory is being heavily used but it's cached memory rather than processes so that's not actually 'full'
• Dockers are still mostly up - they just struggle to write to anything
• Disks are all detected, accessible and have 10's of GB of free space (50GB+ on all disks with ~87% usage on the entire array)

 

I've attached some files with various outputs but I can't get diagnostics to run or save so that's a no-go unfortunately 😔

diagnostics.txt free-m.txt syslog.txt diagnostics.zip

I renamed the post in the hopes that someone else with more experience in this will look at it.

Brill! Thank you 🙇‍♂️