After restarting the machine, if Docker is not started, everything will be stable. However, when I started Docker, my Weiui crashed. This issue not only occurred in version 6.12.8, but also in version 6.12.6. The sensitive operations I have carried out are as follows:
Enable automatic acquisition of IPv6
Updated all plugins
Using the NerdTools plugin
One of my hard drives is 100% full, and the remaining data is currently stored on the disk.
taor-unraid-diagnostics-20240221-2347.zip
-------------------------------------------------- -------------------------------------------------- --------------------
20240224更新:
Translated into Chinese:
After repeated attempts, it was found that when running some Docker containers, the webui would crash directly. Although some Docker containers can run, running them for a certain period of time can also cause webui crashes. However, when I connected the other NAS to the monitor, I found that the system had already started my log server and obtained the following logs.
Syslog-127.0.0.1log
I have tried switching from macvlan to ipvlan, or changing it repeatedly.
I have also tried using the eth1 port for Docker containers, but unfortunately, my router only supports one subnet and cannot set eth0 and eth1 to the same subnet.
I also deleted the original subnet.
I hope experts can guide me~~~~~~~~~
翻译成中文:
经过反复尝试,发现运行一些Docker容器时,webui会直接崩溃。一些Docker容器虽然可以运行,但运行一定时间后也会导致webui崩溃。(但是,当我将NAS其他连接到显示器时,我发现系统我已经启动了我的日志服务器并获得了以下日志。
syslog-127.0.0.1.log
我尝试过从 macvlan 切换到 ipvlan,或者反复更改。
我也尝试过将 eth1 端口用于 Docker 容器,但遗憾的是,我的路由器仅支持一个子网,并且无法将 eth0 和 eth1 设置为同一子网。
我还删除了原来的子网。
希望高手指导一下~~~~~~~~~
-------------------------------------------------- -------------------------------------------------- --------------------
20240227 ROLVED。
The problem has been resolved,
I reinstalled the Chinese language pack and everything returned to normal. I am using ipvlan
This leaves me speechless.
翻译成中文:
问题解决了
重装了一次中文语言包,一切都恢复正常了,使用ipvlan
令我非常无语..............
很遗憾,问题依然存在
-------------------------------------------------- -------------------------------------------------- --------------------
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.