TaoR
Members
-
Joined
-
Last visited
-
十分感谢您的讲解~~
-
十分感谢！ 确实是固态的问题 并且smart 文件系统状态检查 读写测试等方式都检测不出来 只有重新格式化时，才能发现问题…… 固态是致态的2022款 tiplus5000 已经联系售后邮寄回去检测 Cache Dirs 插件 已经卸载 请问，这个插件不启用的话，影响大么，为防止重复问题发生，我打算不重装它了 谢谢您的支持！
-
taor-unraid-diagnostics-20240227-0149.zip syslog-127.0.0.1.log 已更新，谢谢！
-
谢谢两位大佬的帮助，突然想起来，我在上个版本6.12.6有过更新汉化包插件，把汉化包删除了之后，一切都正常了。。。 一个小时后又崩了....是我高兴太早了
-
谢谢大佬！ 已更新！ syslog-127.0.0.1.log
-
谢谢您！ 日志服务器一直没明白怎么用，这回使用上了 报错日志在附件~~ syslog-127.0.0.1.log
-
谢谢您的答复！ 不过当我使用双网关方式解决时，我遇到了一个问题： 我的路由器非openwrt，仅有一个网关，使用双eth时第二个eth ip 无法设置。。重复时则无效
-
After restarting the machine, if Docker is not started, everything will be stable. However, when I started Docker, my Weiui crashed. This issue not only occurred in version 6.12.8, but also in version 6.12.6. The sensitive operations I have carried out are as follows: Enable automatic acquisition of IPv6 Updated all plugins Using the NerdTools plugin One of my hard drives is 100% full, and the remaining data is currently stored on the disk. taor-unraid-diagnostics-20240221-2347.zip -------------------------------------------------- -------------------------------------------------- -------------------- 20240224更新： Translated into Chinese: After repeated attempts, it was found that when running some Docker containers, the webui would crash directly. Although some Docker containers can run, running them for a certain period of time can also cause webui crashes. However, when I connected the other NAS to the monitor, I found that the system had already started my log server and obtained the following logs. Syslog-127.0.0.1log I have tried switching from macvlan to ipvlan, or changing it repeatedly. I have also tried using the eth1 port for Docker containers, but unfortunately, my router only supports one subnet and cannot set eth0 and eth1 to the same subnet. I also deleted the original subnet. I hope experts can guide me~~~~~~~~~ 翻译成中文： 经过反复尝试，发现运行一些Docker容器时，webui会直接崩溃。一些Docker容器虽然可以运行，但运行一定时间后也会导致webui崩溃。（但是，当我将NAS其他连接到显示器时，我发现系统我已经启动了我的日志服务器并获得了以下日志。 syslog-127.0.0.1.log 我尝试过从 macvlan 切换到 ipvlan，或者反复更改。 我也尝试过将 eth1 端口用于 Docker 容器，但遗憾的是，我的路由器仅支持一个子网，并且无法将 eth0 和 eth1 设置为同一子网。 我还删除了原来的子网。 希望高手指导一下~~~~~~~~~ -------------------------------------------------- -------------------------------------------------- -------------------- 20240227 ROLVED。 The problem has been resolved, I reinstalled the Chinese language pack and everything returned to normal. I am using ipvlan This leaves me speechless. 翻译成中文： 问题解决了 重装了一次中文语言包，一切都恢复正常了，使用ipvlan 令我非常无语.............. 很遗憾，问题依然存在 -------------------------------------------------- -------------------------------------------------- --------------------
-
Feb 21 23:19:15 TaoR-unraid kernel: x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks Feb 21 23:19:15 TaoR-unraid kernel: ACPI: Early table checksum verification disabled Feb 21 23:19:15 TaoR-unraid kernel: xor: measuring software checksum speed Feb 21 23:19:15 TaoR-unraid kernel: BERT: [Hardware Error]: Skipped 1 error records Feb 21 23:19:15 TaoR-unraid kernel: usb 1-6: device descriptor read/64, error -71 Feb 21 23:19:15 TaoR-unraid kernel: usb 1-6: device descriptor read/64, error -71 Feb 21 23:19:15 TaoR-unraid kernel: usb 1-6: device descriptor read/64, error -71 Feb 21 23:19:15 TaoR-unraid kernel: usb 1-6: device descriptor read/64, error -71 Feb 21 23:19:15 TaoR-unraid kernel: usb 1-6: device not accepting address 4, error -71 Feb 21 23:19:15 TaoR-unraid kernel: usb 1-6: device not accepting address 5, error -71 Feb 21 23:19:15 TaoR-unraid kernel: floppy0: no floppy controllers found Feb 21 23:19:25 TaoR-unraid sshd[1232]: error: Bind to port 22 on 2408:822a:******* failed: Cannot assign requested address. Feb 21 23:19:25 TaoR-unraid sshd[1232]: Server listening on 192.168.31.10 port 22. Feb 21 23:19:25 TaoR-unraid ntpd[1286]: bind(19) AF_INET6 2408:822a:c610:1511::c2d#123 flags 0x11 failed: Cannot assign requested address Feb 21 23:19:25 TaoR-unraid ntpd[1286]: failed to init interface for address 2408:*****::c2d Feb 21 23:19:25 TaoR-unraid smbd[1361]: smbd_open_one_socket: open_socket_in failed: Cannot assign requested address Feb 21 23:19:25 TaoR-unraid smbd[1361]: smbd_open_one_socket: open_socket_in failed: Cannot assign requested address Feb 21 23:19:26 TaoR-unraid mcelog: failed to prefill DIMM database from DMI data Feb 21 23:19:39 TaoR-unraid sshd[1232]: Received signal 15; terminating. Feb 21 23:19:43 TaoR-unraid avahi-daemon[6349]: Failed to parse address 'fe80::cabf:4cff:fe1f:a57f%br0', ignoring. Feb 21 23:19:50 TaoR-unraid emhttpd: /mnt/disk4: autotrim setxattr error: No space left on device Feb 21 23:19:54 TaoR-unraid avahi-daemon[10648]: Failed to parse address 'fe80::cabf:4cff:fe1f:a57f%br0', ignoring. Feb 21 23:19:54 TaoR-unraid kernel: BTRFS info (device loop2): using crc32c (crc32c-intel) checksum algorithm Feb 21 23:20:17 TaoR-unraid root: Error response from daemon: network with name br0 already exists Feb 21 23:20:21 TaoR-unraid root: Error response from daemon: Pool overlaps with other one on this address space Feb 21 23:20:21 TaoR-unraid root: Error response from daemon: invalid subinterface vlan name vhost2, example formatting is eth0.10 Feb 21 23:20:21 TaoR-unraid kernel: BTRFS info (device loop3): using crc32c (crc32c-intel) checksum algorithm Feb 21 23:20:22 TaoR-unraid kernel: nvme 0000:03:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update Feb 21 23:20:22 TaoR-unraid kernel: nvme 0000:03:00.0: failed VPD read at offset 1 Feb 21 23:20:24 TaoR-unraid webGUI: Successful login user root from 192.168.31.99 崩溃前的日志
-
可以手动下载后上传 不过遗憾的是，我的webui崩了，暂时看不了插件源地址
-
除非我手动强制重启，否则一直无法访问webui的界面 我该怎么解决。。。
-
另外，又用了您的优惠码从basic升级为pro了，哈哈哈，当初最早五折时应该直接买pro的，多花了十来刀嘿嘿
-
谢谢大佬们回复，我明白了，是我自己的路由器不支持多网段路由 所以不管怎么样，都会自动映射出去 谢谢~~~
-
各位大佬，请教一个想不明白的问题。 unraid使用了旁路由的方式接入了家庭主网段192.168.31.0/24 我已经新建了一个名为net_dockershare的新子网，并且配置了相应的ip段 root@TaoR-unraid:~# docker inspect net_dockershare [ { "Name": "net_dockershare", "Id": "8d4e2a3b868f1bd2fa1ace0196506482d5da31c3b9d0e3e72b928a53d8c5d652", "Created": "2023-10-15T10:23:02.28393405+08:00", "Scope": "local", "Driver": "bridge", "EnableIPv6": true, "IPAM": { "Driver": "default", "Options": {}, "Config": [ { "Subnet": "192.168.32.0/24", "Gateway": "192.168.32.1" }, { "Subnet": "fc00:1234:32::/64", "Gateway": "fc00:1234:32::1" } ] }, "Internal": false, "Attachable": false, "Ingress": false, "ConfigFrom": { "Network": "" }, "ConfigOnly": false, "Containers": { "7f7c1641aaa2f91648f547b6cbe451e6cb938f0a66fc5764d7e0eda5d7a069d4": { "Name": "lookingglass", "EndpointID": "773a478ed8cc2fdec6da54510bfe434cfaaa59eec06330ecf7e1cc2542c4f240", "MacAddress": "02:42:c0:a8:20:0d", "IPv4Address": "192.168.32.13/24", "IPv6Address": "fc00:1234:32::4/64" }, "9f828ab967b9e014a10aa77c848babaf93d6faf65f1bb4ffd9f5427c555771f0": { "Name": "Nacho-Rclone-Native-GUI", "EndpointID": "75be973713ed668c996514944fb11f4f99e9d5126edc824f3456251399a6d1ba", "MacAddress": "02:42:c0:a8:20:0b", "IPv4Address": "192.168.32.11/24", "IPv6Address": "fc00:1234:32::3/64" }, "e70be4e27aaf57bb79b7ec5b2cd8a1bf7a1a095512f042cb518aaee8635d4c06": { "Name": "speedtest-test", "EndpointID": "c1bddf7dd4743bb9724bffdb602bed04a632f61b13b6b3d96c2b6f493ddc7114", "MacAddress": "02:42:c0:a8:20:0c", "IPv4Address": "192.168.32.12/24", "IPv6Address": "fc00:1234:32::2/64" } }, "Options": {}, "Labels": {} } 如图，新建了三个容器，也均采用了该自定义网络的网段 例如窥镜的cli： docker run -d --rm \ --name lookingglass \ -e HTTP_PORT=8100 \ -p 8101:8100 \ --net=net_dockershare \ --ip 192.168.32.13 \ wikihostinc/looking-glass-server 但为什么，构建容器后，unraid会自动将地址映射到br0 如图 现在就只能通过192.168.31:8101来访问，不能通过192.168.32.13:8100访问 PS:docker设置如下 大佬们救救啊！！！！