Nuke

Members
 View Profile  See their activity

  • Posts

    65

  • Joined

  • Last visited

 Content Type 

Posts posted by Nuke

    [Plugin] CoreFreq

    in Plugin Support

    Posted · Edited by Nuke

    On 8/17/2023 at 4:44 PM, CyrIng said:

    So the right parameter you need is: 

    Ratio_HWP=-1,37,-1

     

    I found that CPU still jumping to 43 even if 37 was truly settled automatically after reboot (i see it in F4 - p).

    I change it manually to 43 and again to 37 and now it works as expected - not exceed 37 and shows lower temperature and MHz during stress.

    [Plugin] CoreFreq

    in Plugin Support

    Posted

    On 8/17/2023 at 4:44 PM, CyrIng said: 
    static signed int Ratio_HWP[1 + (BOOST(HWP_TGT) - BOOST(HWP_MIN))] = {
	/*	HWP_MIN 	*/	-1,
	/*	HWP_MAX 	*/	-1,
	/*	HWP_TGT 	*/	-1
};

    So the right parameter you need is: 

    Ratio_HWP=-1,37,-1

     

    Yes! Thank you! 🤝

    • Like 2

    [Plugin] CoreFreq

    in Plugin Support

    Posted · Edited by Nuke

    59 minutes ago, ich777 said:

    This should do the trick for you: 

    kill $(pidof corefreqd)
modprobe -r corefreqk
modprobe corefreq Experimental=1 PState_FID=37
corefreqd &
corefreq-cli

     

     

    44 minutes ago, ich777 said: 
    insmod /lib/modules/5.19.17-Unraid/extra/corefreqk.ko.xz PState_FID=37

     

     

    No processes coref*

    image.png.d77e46b115686e6aab33fb15d51e8f99.png

     

    image.png.22b6ae11d4521039860d5a6250456fb5.png

    • Thanks 1

    [Plugin] CoreFreq

    in Plugin Support

    Posted

    13 hours ago, CyrIng said:

    Please add parameter Experimental=1

     

    Then verify the obtained frequency 

    Nope.

     

    13 hours ago, CyrIng said:

    Next start directly CoreFreq with the parameter:

    1. Change to directory of the driver

    1. insmod corefreqk.ko PState_FID=37 

    2. corefreqd 

    3. corefreq-cli 

     

    Check the resulting frequency 

    I can't find properly directory. I see only *.ko.xz file

     

    image.png.91eecbea4c0bfe6d1d1be9b781df5f00.png

    [Plugin] CoreFreq

    in Plugin Support

    Posted

    4 hours ago, ich777 said:

    Have you yet searched for „ratio“ on the second page from the plugin?

    Yep.

     

    image.png.6a2cef0abcab49913b476688f2432ccc.png

     

    I guess "Ratio_HWP" is what i'm looking for but what "array of int" i should type for change "Max" to 37 ?

    [Plugin] CoreFreq

    in Plugin Support

    Posted

    I need a little slow-down my CPU for hold temperature under 70C instead of >85C, so i change max ratio from 43 to 37.
    How can i make it persistent?
    I see the new module options section but I don't see the required line.

    image.png

    2 hdd errors after years

    in General Support

    Posted · Edited by Nuke

    👋🏼👋🏼👋🏼

    Unraid says one of my hdd get 2 errors.

    After reboot array not online, drive is missing (i don't use parity).

    Fully powered off pc remotely via smart outlet, 5 min waiting and powered on again. No problems now.

    What type of problem i have? power/sata cable?

     

    Drives is sleeping 99.9% of time, spinned up every night for syncing etc.

     

    hpserv-diagnostics-20230812-1017.zip

     

    smartctl -x /dev/sdb (https://justpaste.it/6dh2t)

    shows hundreds repeating error:

     

    Error 1684 [3] occurred at disk power-on lifetime: 32767 hours (1365 days + 7 hours)

      When the command that caused the error occurred, the device was active or idle.

     

      After command completion occurred, registers were:

      ER -- ST COUNT  LBA_48  LH LM LL DV DC

      -- -- -- == -- == == == -- -- -- -- --

      04 -- 61 00 02 00 00 00 00 00 00 a0 00  Device Fault; Error: ABRT

     

      Commands leading to the command that caused the error were:

      CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name

      -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

      ef 00 10 00 02 00 00 00 00 00 00 a0 08  1d+21:05:04.675  SET FEATURES [Enable SATA feature]

      ec 00 00 00 00 00 00 00 00 00 00 a0 08  1d+21:05:04.675  IDENTIFY DEVICE

      ea 00 00 00 00 00 00 00 00 00 00 e0 08  1d+21:05:04.657  FLUSH CACHE EXT

      ef 00 10 00 02 00 00 00 00 00 00 a0 08  1d+21:05:04.656  SET FEATURES [Enable SATA feature]

      ec 00 00 00 00 00 00 00 00 00 00 a0 08  1d+21:05:04.655  IDENTIFY DEVICE

     

    FireShot Capture 029 - hpserv_Device - 192.168.0.9.png

    photo_2023-08-12_11-21-10.jpg

    Dynamix - V6 Plugins

    in Plugin Support

    Posted · Edited by Nuke

    On 7/17/2022 at 9:12 PM, John_M said:

     

    That is the current version. More information is needed about your problem though. I haven't experienced it for five years.

    I only need telegram notifications.

    How can I completely disable email authorization and notifications?

    There is no "disable" option. If i choose custom then all fields must be filled.

    If i leave it at "google" then it spam in logs about unsuccessful authorization. Even if all "email" box is unchecked.

    image.thumb.png.82e82a0954e778c6db74b7ed5b7da4e9.png

     

    image.thumb.png.931120e687cce32fe93a2d1586b4018c.png

    • Upvote 1

    [SUPPORT] malvarez00 - MotionEye

    in Docker Containers

    Posted · Edited by Nuke

    I use https://hub.docker.com/r/djaydev/motioneye/ (deleted) docker. All paths mounted to NVMe disk.
    When I open motioneye website to watch my camera - both HDDs start spining, in syslog i see read SMART.
    This is bad. 99.9% of the time my hdd's should sleep.
    That happens not each time. But each ~12 hours or more.

    Server randomly hangs

    in General Support

    Posted · Edited by Nuke

    My server started to hangs, one time for 1-2 weeks, power button not shutting it down as when normal operation, wake-on-lan also does not help. So i should hold button for 4 sec.

    Last time it was few hours ago, between Dec 28 ~5:00 - 6:00

    I am not live with this server near me so each time it is headache to do hard reboot for it.

     

    Tools-Diag after done after reboot.

    Tools - Syslog Server hold last days information but i don't see any problem, it just stoped and then resumed after i reboot machine.

    syslog-192.168.0.9.log anon_hpserv-diagnostics-20211228-0929.zip