rx8freehk

I was having issues with emby locking up. I would restart the docker and restart kodi on all attached boxes, and within a day it would lock, not sure what was triggering it. I tried to completely delete the docker image file and the folder as well as blown out emby on both Kodi boxes and redid everything. 5 hours after it finished updating, it locked. https://pastebin.com/x1z7vSuY Unraid 6.5.0

After update, Unable to connect to TS

ugg... so I have to set everything back up? was tying to avoid that.

Cant get the serveradmin password to work trying to generate a new privilege key so trying to reset it. How do I use the additional parameter : serveradmin_password=MY_NEW_PASSWORD_HERE The linix example given here states the following: Linux example: ./ts3server_minimal_runscript.sh inifile=ts3server.ini serveradmin_password=test1234 I was thinking it could be accomplished utilizing the variable function in the container but I am unable to get it to work. Any suggestions?

Ya.. i could have reworded it differently so it wasn't offensive... my bad . This is what I had to do to get it to work. By all means please explain how to do it if this is not correct.

Fixed it after fiddling.... NETWORK = BRIDGE PRIVILEGED = ON On the bottom, click "Add another Path,Port, or Variable". Create the following: TCP 9987 UDP 30033 UDP 10011 Apply = Win I have no idea why these things are not in by default for Binhex or linuxserver, but can confirm this works with both.

How was this achieved, every time I restart the server it asks for a token and all channels are gone.

This crap has been plauging me from the start on windows 10 and I finally got fed up with it... This fixed my issue!, need to have some sort of "Shitty windows 10 workaround" added to the wiki

Its 2015... isn't there a better option? I need to move 12TB of data to a new Unraid server and this is maddening.. My Linux skills are admittedly horrindious

yes mapped in the docker... i was grasping at straws and gave it full access to the folder. ITS FIXED NOW. Here is what I did. "Did you edit the .cfg file in Windows?" Yes... but more than that I created the file from notepad as I accidental deleted the original. Add that to my apparent inability to utilize fromdos properly and I am left with the previous situation. SO, I downloaded sickbeard... jacked the "sample" file and edited that. Everything is good to go now. Thanks Ambrotos!!!!

No joy, maintaining the same error

Do I need to provide any additional information? Is this a known issue that I haven't been able to find out about?

Well, at least nobody answered quick... that makes me feel better somehow lol I tried changing Sickbeards Host/Container to match 8081/8081 with no joy.

Unraid 6.0.1 In Docker *binhex/arch-sabnzbd:latest* SABNZBD is on Container/Host port 8080/8080 (accessed on 8080) Sabnzbd has access to: /mnt/cache/apps/Beardrage/Sickbeard/autoProcessTV Folder confirms it has access and "tv" is set to run sabtosickbeard.py Config file has in it: [sickBeard] host=192.168.1.111 (have also tried just "tower") port=8082 username=**** password=**** web_root=ssl=0 *sparkyballs/beardrage:latest* Sickbeard is on Container/Host port 8081/8082 (accessed on 8082) The error in SABNZBD when trying to post process is: Loading config from /autoProcess/SickBeard/autoProcessTV/autoProcessTV.cfg Traceback (most recent call last): File "/autoProcess/SickBeard/autoProcessTV/sabToSickBeard.py", line 29, in <module> autoProcessTV.processEpisode(sys.argv[1], sys.argv[2]) File "/autoProcess/SickBeard/autoProcessTV/autoProcessTV.py", line 56, in processEpisode config.readfp(fp) File "/usr/lib/python2.7/ConfigParser.py", line 324, in readfp self._read(fp, filename) File "/usr/lib/python2.7/ConfigParser.py", line 546, in _read raise e ConfigParser.ParsingError: File contains parsing errors: /autoProcess/SickBeard/autoProcessTV/autoProcessTV.cfg [line 6]: '****\r\n' [line 8]: '****\r\n' 6 and 8 are username/password. I have exhausted my troubleshooting knowledge and would appreciate any insight!

I guess yall agree

Will be running docker heavy, and I want to be able to expand this time. Throw in some SUPERMICROAOC-SAS2LP-MV8 SAS 8-Port Controller Cards and I could top this out with 4TB's someday at 76TB CPU: Intel Core i3-4160 3.6GHz Dual-Core Processor MOBO: ASRock Z97 EXTREME6 ATX LGA1150 Motherboard RAM: Crucial Ballistix Sport 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)BLS2K8G3D1609ES2LX0 HDD: 6x Western Digital Red 4TB 3.5" 5900RPM Internal Hard Drive HDD Cache: Western Digital BLACK SERIES 1TB 3.5" 7200RPM Internal Hard Drive CASE: Antec Twelve Hundred V3 ATX Full Tower Case PSU: Corsair HX750i High Performance Power Supply ATX12V/EPS12V 750 CP-9020072-NA DRIVE CAGES: 2x NORCO SS-500 5-Bay SATA / SAS Hot Swap Rack Module FLASH: SanDisk Cruzer Fit 8GB USB 2.0 Low-Profile Flash Drive- SDCZ33-008G-B35 All opinions welcome, I will be ordering tomorrow evening. I will use this as a build thread after I order.

Haven't had time to dive into this just yet, I did order 8GB (2x 4GB) of RAM and will tackle the other suggestions this weekend. Really appreciate the time you took for such an in depth analysis of the logs!

ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes ipconfig eth0 eth0 Link encap:Ethernet HWaddr 00:0a:cd:1b:57:79 inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:116000805 errors:0 dropped:76 overruns:0 frame:0 TX packets:104131638 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2523439851 (2.3 GiB) TX bytes:712048646 (679.0 MiB) Interrupt:18 Base address:0xec00

Hello all, been running Unraid now for about 9 months and the speed is finally irratated me enought to try to figure out what the heck is going on. Current Setup unRAID Version: unRAID Server Plus, Version 5.0-rc10 Motherboard: ASRock - N68C-S Processor: AMD AthlonTM II X3 450 - 3.2 GHz Cache: L1 = 384 kB L2 = 1536 kB Memory: 2 GB - DIMM0 = 400 MHz DIMM1 = 400 MHz Network: 1000Mb/s - Full Duplex sda Flash Drive DT_Micro (7GB - 174MB Used) sdd Cache Drive WDC_WD1001FALS-00E8B0 (Black) (1TB - 102GB Used) sdh Parity Drive Hitachi_HDS723020BLA642 (2TB) sde HD1 Hitachi_HDS723020BLA642 (2TB - 1.88TB Used) sdf HD2 Hitachi_HDS723020BLA642 (2TB - 1.93TB Used) sdc HD3 TOSHIBA_DT01ACA200 (2TB - 1.21TB Used) sdg HD4 WDC_WD20EARX-00PASB0 (Green) (2TB - 1.92TB Used) sdb HD5 WDC_WD20EARX-00PASB0 (Green) (2TB - 1.55TB Used) SD A,H,E,F are connected to MB SD D,G are connected to Silicon Image SIL3132 (1) SD B is connected to another Silicon Image SIL3132 (2) Packages running - Plex Media Server SABnzbd+ Sickbeard Couchpotato Transmission Mysql Nothing Currently being downloads/processed/viewed/etc Im pulling approx 4.3MB/s transfering 7GB .iso files from one of my unraid shares (not cached) and typically i max out around 12MB/s. Any/all help is greatly appreciated! syslog.txt

Followed instructions and now cant access tower at all Heres the log thanks! syslog.zip