Billz

Hi Guys, I went through this awhile back after I updated to the latest version of Sonarr. Well that must have changed again. I keep getting "Import failed, path does not exist or is not accessible by Sonarr". I've checked my settings again and again to no avail. I even tried dropping files in the complete folder under tv and that will not work either. I've attached the docker settings, the Sonarr settings screenshot, and the log. I'd really appreciate it if someone could tell me what I am doing wrong. sonarr.txt

Hi Guys, I've been using unRAID for 5 years or more. I finally decided to move from my PCI-X controllers to a LSI 9201-16i. I installed the controller and moved one drive over. The server came back up, but I get a red X for the status of the drive. I stopped the array, unassigned and reassigned the drive and I still get the red X for the status of the drive. I can go into the drive details and see the smart data for the drive and what not. I can even unassign and reassign the drive to the second parity drive slot if I wanted to, don't worry I didn't. This just seems really weird to me as I thought that moving to a new controller would be relatively painless. Any help or pointers that you can give me would be greatly appreciated.

Hi, I am currently on version 5 and use Sickbeard, Plex, Couchpotato, and Sabnzb plugins. I'm looking to upgrade to version 6 and setup the docker apps. I tried searching the forum to see if I could just point the docker to the old config files for the old plugins. Would this work? I'm hoping I wouldn't need to resetup all of these apps. Any help would be greatly appreciated. Thanks, Bill

V6 completely supports 3 different file formats, and the array can mix them up, all of one type or some of each type. Parity protection does not care about what's on a disk, including what file format it is in. Awesome. Thanks for the info.

I have a quick question. I'm sorry if it has already been covered, but I'm still on Unraid 5. I want to move to 6 and convert all my disks to XFS gradually. If I run the array with mostly RFS disks and one or two XFS disks, will my array still be protected? Can I recover from a disk loss, either RFS or XFS disk losses? I just want to be sure as I have all 2tb drives and want to slowly convert all of them to 5TB drives over the period of a year. Any clarification would be greatly appreciated.

I have actually fixed this issue. Turns out the 2nd drive was bad. Now I am having an issue with plex, but I will start a new post for that. Thanks for all the help. Bill

I did the reiserfsck suggested above on disk 20 and I then used the --rebuild-tree command as the program suggested. It found 7 corruptions and fixed them. When I started the array again I had the same problem. I am going to replace disk 20 again and see if I just had another faulty drive. Any other suggestions if the new drive does the same thing? I really would like to get this working. Thanks, Bill

Hey guys. I was running 5.0rc15a I believe and I had a drive fail. I popped in a new drive and the array rebuilt. Now when I try to write to certain shares I get read only access errors. I upgraded to 5.0 at that time to see if I could resolve that issue. the mover is also not working. I ran the permission reset script and that still didn't work. From what I can tell by the logs disk 20, which was the one replaced, is still not working correctly. It is still green though on the main page. Any suggestions on how I can resolve this? Any help would be greatly appreciated. Thanks, Bill unraid_log.txt

This just started happening for me yesterday out of the clear blue. Is there anything I can do other than have to reboot my server every half hour or so? I am also running plex and turning plex off has no difference. I have never had this issue before today and I am running RC11. Thanks, Bill

Thank you so much!!!! I ran both the check and the fix on disk 2 just as I did on disk 1 before and it found 2 corruptions. It is working correctly now. I am very thankful for your advice. Have a great day, Bill

Hi Guys, I just bought the 2x Pro version of unRaid a couple of days ago. I am running 5.0-rc5, the latest release. I have 1 2TB Hitachi and 4 2TB Seagates setup in my server. Last night I was transfering about 2TB's of files to my server and in the morning I found a window saying that I couldn't write to the server. Read only access. I was only able to transfer around 1TB of data. I ran the reiserfsck --fix-fixable /dev/md1 command and no corruption or errors were found. I really want to get this up and running as I have tons of data to move and more drives to add. I have attached my syslog. Any help would be greatly appreciated. Thanks, Bill unRaid_Error_Log_07-18-2012.txt