uaborne

I just resolved my issue. From the dockers console I ran the following commands which allowed me to login. /usr/local/openvpn_as/scripts/sacli --key "vpn.server.daemon.enable" --value "false" ConfigPut /usr/local/openvpn_as/scripts/sacli --key "vpn.daemon.0.listen.protocol" --value "tcp" ConfigPut /usr/local/openvpn_as/scripts/sacli --key "vpn.server.port_share.enable" --value "true" ConfigPut /usr/local/openvpn_as/scripts/sacli start

I believe I have an idea as to the issue. My new server has 64 cores so I'm assuming it's trying to launch a large amount of tcp/udp daemons and it's causing the problem. Is there somewhere I can modify this setting or a command i can run via console to set these numbers lower to test since I can't get into the openvpn webui's settings?

I'm currently experiencing the same issue as cherritaker. Same info except I used /mnt/cache and it's a new container. Unfortunately I'm not sure what's going on looking at the openvpn logs. Full logs here if needed. Additional Info: Seems to be something wrong with this server. I have another server that I just installed the container on and it works fine. The server the issue is on is newly setup and going to replace the other one. 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Starting factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b97d230>' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Stopping factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b9f0d70>' 2020-02-10T18:43:35-0600 [stdout#info] 'NoneType' object has no attribute 'status': xml/authrpc:250,sagent/saccess:62,subscription/subxml:19,subscription/subxml:29 (exceptions.AttributeError) 2020-02-10T18:43:35-0600 [twisted.python.log#info] "-" - - [11/Feb/2020:00:43:35 +0000] "POST /RPC2 HTTP/1.0" 200 328 "-" "Twisted/XMLRPClib" 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:43:35-0600 [stdout#info] SESSION ERROR: exceptions.AttributeError: 'NoneType' object has no attribute 'status' (9000)" 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [stdout#info] ERROR in renderHTTP (astatus.py)' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [stdout#info] GetSubscriptionStatus: <Fault 9000: "exceptions.AttributeError: \'NoneType\' object has no attribute \'status\'">' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [stdout#info] GetSubscriptionStatus: <Fault 9000: "exceptions.AttributeError: \'NoneType\' object has no attribute \'status\'">' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Starting factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b97dc80>' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Stopping factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b97d230>' 2020-02-10T18:43:35-0600 [twisted.python.log#info] "-" - - [11/Feb/2020:00:43:35 +0000] "POST /RPC2 HTTP/1.0" 200 197 "-" "Twisted/XMLRPClib" 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:43:35-0600 [stdout#info] SESSION ERROR: GuardSession instance has no attribute 'node': flat/twist:24,flat/ten:83,flat/flatstan:103,flat/ten:70,flat/ten:61,flat/flatstan:264,flat/ten:70,flat/ten:61,flat/flatstan:247,flat/flatstan:236,verge/verge:186 (exceptions.AttributeError)" 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [UDSProxyQueryProtocol,client] expired session 6fbd...' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [UDSProxyQueryProtocol,client] Logout of portal <twisted.cred.portal.Portal object at 0x14fb0ba7fcd0>' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Starting factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b99f5f0>' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:43:35-0600 [stdout#info] SESSION ERROR: ('Could not adapt', <pyovpn.web.weberr.SessionError object at 0x14fb0b98ea10>, <InterfaceClass nevow.inevow.ISession>): internet/defer:654,admin/autils:1064,admin/autils:601 (exceptions.TypeError)" 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [stdout#info] ERROR in renderHTTP (astatus.py)' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:43:35-0600 [stdout#info] <bound method AdminServerStatus.chain_get_running_state of <pyovpn.admin.astatus.AdminServerStatus object at 0x14fb0b9e9410>>: ('Could not adapt', <pyovpn.web.weberr.SessionError object at 0x14fb0b98ea10>, <InterfaceClass nevow.inevow.ISession>)" 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:43:35-0600 [stdout#info] <bound method AdminServerStatus.chain_get_running_state of <pyovpn.admin.astatus.AdminServerStatus object at 0x14fb0b9e9410>>: ('Could not adapt', <pyovpn.web.weberr.SessionError object at 0x14fb0b98ea10>, <InterfaceClass nevow.inevow.ISession>)" 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Starting factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b99faf0>' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Stopping factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b97dc80>' 2020-02-10T18:43:35-0600 [twisted.python.log#info] "-" - - [11/Feb/2020:00:43:35 +0000] "POST /RPC2 HTTP/1.0" 200 114 "-" "Twisted/XMLRPClib" 2020-02-10T18:43:35-0600 [twisted.python.log#info] "-" - - [11/Feb/2020:00:43:35 +0000] "POST /RPC2 HTTP/1.0" 200 314 "-" "Twisted/XMLRPClib" 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Stopping factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b99f5f0>' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [stdout#info] SESSION ERROR: SESSION: Your session has expired, please reauthenticate (9007)' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [twisted.python.log#info] "192.168.2.220" - - [11/Feb/2020:00:43:35 +0000] "GET /admin/status_overview HTTP/1.1" 500 963 "https://192.168.2.52:943/admin/" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/79.0.3945.130 Safari/537.36"' 2020-02-10T18:43:35-0600 [stdout#info] [WEB] OUT: '2020-02-10T18:43:35-0600 [pyovpn.xml.udscli.UDSProxyQueryFactory#info] Stopping factory <pyovpn.xml.udscli.UDSProxyQueryFactory instance at 0x14fb0b99faf0>' 2020-02-10T18:43:40-0600 [stdout#info] License Info {'apc': False, 'concurrent_connections': 2} 2020-02-10T18:44:29-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:44:29-0600 [twisted.web.http.HTTPChannel#info] Timing out client: IPv4Address(type='TCP', host='192.168.2.220', port=59280)" 2020-02-10T18:44:29-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:44:29-0600 [twisted.web.http.HTTPChannel#info] Timing out client: IPv4Address(type='TCP', host='192.168.2.220', port=59281)" 2020-02-10T18:44:29-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:44:29-0600 [twisted.web.http.HTTPChannel#info] Timing out client: IPv4Address(type='TCP', host='192.168.2.220', port=59282)" 2020-02-10T18:44:35-0600 [stdout#info] [WEB] OUT: "2020-02-10T18:44:35-0600 [twisted.web.http.HTTPChannel#info] Timing out client: IPv4Address(type='TCP', host='192.168.2.220', port=59274)"

I just found these errors in letsencrypt log so i was just about to ask where the htpasswd file should be. I only had it in heimdall so i should copy it to the letsencrypt config folder instead? for reference i ran docker exec -it heimdall htpasswd -c /config/nginx/.htpasswd <username> in the unraid console/terminal and I deleted the default file from the heimdal folder /nginx/site-confs. 2019/09/05 12:15:05 [error] 378#378: *9 open() "/config/nginx/.htpasswd" failed (2: No such file or directory), client: xxx.xxx.xxx.xxx, server: links.*, request: "GET / HTTP/2.0", host: "x.x.com"

I'm having issues setting up the password auth through my reverse proxy. I've done the htpassd command and deleted the default file. Restarted and force updated the heimdall docker and all attempts to login give me 403 forbidden. What should I be looking at/for to correct this? It works if I don't have basic auth enabled in the letsencrypt conf file.

I didn't even think to check for VT support. Thanks for pointing that out! Was hoping I could upgrade a bit without spending any money but guess I'll be looking for a cheap and decent mb/cpu replacement.

So I've been rolling with a fairly lightweight unraid server running 5.0.5 and am working through getting ready to upgrade to version 6. It's served me fairly well but I'm sure it could do with some upgrades and I've been browsing the forums and see alot of people taking advantage of running Windows VM's and started thinking about converting my old gaming pc over. Currently I have it running as basically my sandbox pc... mostly using it to remote into from work and browsing the web. Obviously the specs are better than my current server but would I have issue's with the components in the old pc? Would it support gaming? Not something I would do often but maybe running a another instance of an MMO is possible. For Reference my Unraid server is currently for Emby/SabNZB/NZBDrone and is running AMD A4-3400 APU with Radeon HD Graphics @ 2.7 GHz Gigabyte GA-A75M-S2V 4 GB PC3-12800 Ram 5 x drives (12TB) Cache (Non-SSD) Old PC: Intel® Core i7 CPU X 980 @ 3.33GHz Asus P6X58-E PRO 12 GB PC3-10700 ASUS GTX680-DC2T-2GD5 I do have a Crucial SSD C300 256GB in it that I would leverage as the VM and/or Cache drive. I feel like it would be a good swap. I'm a bit apprehensive with doing it though as I do most everything with this pc other than gaming. Nothing I couldn't recover from though. Edit: Think I'm answering my gaming question as being not possible without another GPU as I wouldn't be able to passthru correct? What other limitations would I experience without another GPU? apologies if I've asking questions already answered. Perusing the board now trying to delve deeper into this.

So it looks like my cache drive has failed/is failing. I'd like to try to see if reiserfsck could fix the issues and at the very least recover it to where I can pull the data off of it before replacing. Would it be possible with the error it is getting to do this and if so what commands would I need to run. Looks like I need to do --rebuild-sb and the wiki recommends asking for help in this case. I don't want to break it further Syslog is attached and I think this is the relevant error 4 00:28:50 Northrend emhttp: shcmd (40): set -o pipefail ; mount -t reiserfs -o user_xattr,acl,noatime,nodiratime /dev/sdg1 /mnt/cache |& logger Jun 4 00:28:50 Northrend logger: mount: wrong fs type, bad option, bad superblock on /dev/sdg1, Jun 4 00:28:50 Northrend logger: missing codepage or helper program, or other error Jun 4 00:28:50 Northrend logger: In some cases useful info is found in syslog - try Jun 4 00:28:50 Northrend logger: dmesg | tail or so Jun 4 00:28:50 Northrend logger: Jun 4 00:28:50 Northrend emhttp: _shcmd: shcmd (40): exit status: 32 Jun 4 00:28:50 Northrend emhttp: disk24 mount error: 32 Jun 4 00:28:50 Northrend emhttp: shcmd (41): rmdir /mnt/cache Jun 4 00:28:50 Northrend kernel: REISERFS warning (device sdg1): sh-2021 reiserfs_fill_super: can not find reiserfs on sdg1 syslog.txt

Well I removed all plugins and still couldn't get in. Did the bit in your sig and now have access. Thanks

So i'm only able to access my server via telnet. When I try to access //tower i'm getting connection refused. There's been no changes made to the system since it was setup. I'm running RC3. Think there may be a potential fix for this? If I choose to start from scratch with the latest RC would I risk losing my data? System: Gigabyte GA-A75M-S2V AMD A4-3400 2.7 GHz 4 GB PC3 128000 Intel NIC Lexar Jumpdrive Firefly 4GB 4 3TB WD Green drives 1 500 GB cache drive syslog.txt