Duppie
-
Posts
40 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Duppie
-
-
I rebooted many a times. It seems like a BUG. Only having this issue in 6.1.4
Duppie
-
Under Settings Docker it is disabled?
Duppie
-
Thanks Squid, There is a Docker tab and I am definitely not using Docker.
How to disable then? and why only now in release 6.1.4?
Duppie
-
Since I upgraded to this release I get the following notifications:
Event: Docker high image disk utilization
Subject: Warning [TOWER] - Docker image disk utilization of 80%
Description: Docker utilization of image file
Importance: warning
And it grows by 1% every 25 minutes. I am not even using Docker?
Duppie
-
Many Thanks dlandon :-)
-
-
Another vote for 6.1
-
Same here :-( and I cannot pinpoint the fault. From Unraid (read) ->>> Synology I get 40MB/sec from Synology >>>> Unraid (write) I get 2MB/sec. The Unraid and Synology box is connected via a 5 x 1G port Netgear switch
Duppie
-
Hi All,
Did someone fine a solution to this? This is really frustrating. ;-(
My Unraid server is about 96% full with 580GB free space and it takes forever to copy a 300MB file to it.
I have also changed the rules of the shares to follow "High-Water" allocation and with no levels.
Any help to fix this will be appreciated and how t stop such a process. Version is 5.06
Thanks
Duppie
-
Thanks for the reply. There is only md5deep-3.6.orig.tar.gz in unMmenu?
Should I install this?
Regards
Duppie
Install that.
I installed it but still getting the following error:
root@Tower:/boot/tools# ./bitrot.sh -a -p /mnt/user/Movies/Documentaries
bitrot, by John Bartlett, version 1.0
Error: The hashdeep package has not been installed.
root@Tower:/boot/tools# which hasdeep
which: no hasdeep in (.:/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/kerberos/bin:/usr/kerberos/sbin)
root@Tower:/boot/tools# which md5deep
/usr/local/bin/md5deep
root@Tower:/boot/tools#
Duppie
-
Getting 2 errors. Anyway to fix this?
./unRAIDFindDuplicates.sh: line 153: [!: command not found
and
ls: cannot access /mnt/disk*//mnt/user/.........
Please see attached.
Duppie
-
Ok thanks,
Will give it a go.
-
Thanks for the reply. There is only md5deep-3.6.orig.tar.gz in unMmenu?
Should I install this?
Regards
Duppie
-
Hi All,
I cant get it to work with version 5.05. What are the steps to install and what is additionally needed for 5.05?
Thanks
Duppie
-
Thanks to all explaining the split levels. Sorry for this, I did not realize it is this complicated and did not want to deviate from the original posts. Anyway, at least I did learn something new about Unraid today.
Duppie
-
Many Thanks jphipps, that seems to have been the issue. After I set the split level to 999 Disk2 was used.
Duppie
-
My split level is 0
In share settings I have all included and none excluded.
The share is called "data"
In the "data" share setting included and excluded disks are empty.
Duppie
-
Hi All,
Was testing 6.0-beta5a out this week and stumbled upon an issue which I think is not right. Herewith the scenario:
- Used the free version for tests. Disk1 and Disk2 shares was enabled and set at the default "High-Water". Disk1 became full with 3G left. Disk2 had 45G left since I deleted some stuff to make space available. I then copied a 5G file to the Data share and it always fail with "(28) No space left on device" from the log. Share is setup to include all disk and exclude none, then.
- I changed the setting to "Most-Free" for the Data share applied it and when copying the 5G file over it failed as above again, then.
- I rebooted the server to make sure the setting is applied, but it failed again. It always start at disk1 to be filled and never copies to disk2 which has the "most-free" space 45G.
Is this a bug or setting mismatch?
Duppie
-
nicinabox, see attached log.
I removed all in extra folder rebooted so that it get installed with max memory available.
Once logged in I reinstalled using the trolley script.
Duppie
-
Motherboard: Sun Microsystems - Ultra 24
Respect. I remember when it was a dream to have Sun kit at home.
True . Pitty Sun Servers became so expensive, but really reliable.
-
Will also check for more memory for the Sun Server. At home I have 6Gig of memory installed and will test that on that server as well.
Thanks for the support.
Will let you know.
Duppie
-
at work I am going through a Proxy. Not sure if this could cause the issues.
Duppie
-
System Overview
unRAID Version: unRAID Server Basic, Version 6.0-beta2
Motherboard: Sun Microsystems - Ultra 24
Processor: Intel® Core2 Quad CPU Q8200 @ 2.33GHz - 2.333 GHz
Cache: L1-Cache = 128 kB (max. 128 kB)
L2-Cache = 4096 kB (max. 4096 kB)
Memory: 1024 Module (max. 8 GB)
BANK0 = 1024 MB, 667 MHz
BANK1 = No Module Installed, Unknown
BANK2 = No Module Installed, Unknown
BANK3 = No Module Installed, Unknown
Network: eth0: 1000Mb/s - Full Duplex
Uptime: 0 days, 0 hours, 27 minutes, 4 seconds
nicinabox, I will try this on my server at home this evening as well and report back.
Duppie
-
Did `source /etc/bundlerc`but still same issue. Also logged out and in again.
Should ruby not be 1.9.3? or is the libraries still on 1.9.1
/usr/lib64/ruby/1.9.1
unRAID Server Release 6.1.4 Available
in Announcements
Posted
Will do once I am at home.
Dppie