TechTitus

I tried that as well when I posted the other diagnostic. I ordered a replacement NVMe to PCIe adaptor but it looks like I don't need it. I switched PCIe slots and the server is working now. I've had an issue with another PCIe slot before so it might be time to upgrade the system. Thanks for the help.

New diagnostics. homenas01-diagnostics-20240116-1632.zip

Tried it, rebooted, and still have the same issue.

Sorry it took so long to respond. The server has been giving me hell. homenas01-diagnostics-20240116-0923.zip

Welp, the server ran for about 12 hours and went unresponsive again.

I'm back up and running, mostly. I booted into safe mode with GUI (without plugins) and everything is working. I wonder if one of the plugins or Community App got corrupted.

I don't but I don't have any parity disks.

I think I have a backup in the cloud. FFFFFFFFF! It says that the cloud backup is disabled.

Yep, that's correct.

Hi All, I've been experiencing a weird issue that has seemed to spiral out of control. It started by booting UnRaid and my Log folder would be 100% full. So I manually set the log file size through command line which works but doesn't persist reboots. Now, my server won't load the Web GUI, or let me run diagnostics through CLI and now does not allow me to connect through SSH at all. Has anyone seen this behavior?

I wish I did. I had been up for 23 hours and was just trying to get it working.

I must be doing something wrong. I setup the network.crg file but I still cannot reach the server. I logged into the server locally and the browser webGUI does not load. Says that the connection to localhost was unable to connect.

Ah ok. I'll give it a try.

Thank you. Hopefully one or two more people will respond before I try this. I don't remember having a bridge but the nic is eth0.

Hello fellow unraiders. I've been up on very little sleep trying to fix my network and did something stupid. I deleted my network.config file and need someone to post the settings for network.conf with a static IP so I can recreate the file. I understand the file gets created when missing for DHCP but I unfortunately don't have a physical router. I'm using opnsense in a VM on unRAID so the server won't be able to pull an address on boot. I was trying to move the server over to a different vlan but I apparently did something wrong which sent me down this hole. This after spending hours trying to figure out why the DHCP server wasn't working in opnsense. Thank you to everyone in advance.

Done! tower-diagnostics-20220925-0950.zip

Hi all. I just purchased some use Seagate Exos 8TB SAS drives and also upgraded UnRaid to 6.11.0. I'm using the 9211-8i which is the SAS2008 based chipset and it states that it's supposed to support 4kn and SAS drives. I'm able to format the drive but when I got to mount they drive, it's unmountable and asks me to format the drive again. Does anyone have any idea what's going on?

This fixed all of my disk issues. CRC UDMA errors, disk becoming unmountable, etc.

Great! Thank you!

I moved the drive to another PCI-E slot and it appears to have fixed the issue. I also moved my 10Gb network card to another slot and it got fried some I'm not sure what's going on with the slots. Thanks for your help!

Correct, I have an M.2 drive connected through an adapter to a pci-e slot. I'll try swapping slots and if that doesn't work, I'll try try a new adapter...and if that doesn't work, I'll burn it to the ground (buy a new SSD). Wait, if I'm seeing UDMA errors and they're connected through HBA cards, could these all be related? If so, what could be the cause?

I was able to set the syslog to mirror to USB and get a copy of the file. When the server locks up, I can't export the diagnostics so I'm not sure what to do there. @JorgeB @tjb_altf4 @trurl syslog

Bump. Can someone please help me out. I have to reboot the server every 10 minutes at this point.

Update to the issue. It's not just the dockers causing the problem. Whenever I transfer a file to the cache ie, Remux file copy to Cache, Transfer large files from desktop to cache, etc. The server locks up. I'm not sure if you'll be able to see anything in the files provided.

I've posted updated diagnostics and syslog. tower-diagnostics-20211019-1804.zip tower-syslog-20211019-2303.zip