ctsdad

December 25, 2023

Did you set a static IP address. I just asked because your router could have changed the IP address and that would stop access. If so you could go to your routers web access address and look for your server. Also map it as static while you were there.

November 8, 2023

On 1/30/2016 at 5:31 PM, zey said:

I swapped system board, added a new hard drive, and swapped one of two of my cache drives. Now I'm getting "Parity Device is Disabled"

I also added a Supermicro AOC-SASLP-MV8. Weird thing is I do not see the option to access it's BIOS at boot up. I attempted to access using "Ctrl+M" however it did not work. So I am not able to confirm that it's not in raid mode nor if INT13 is disabled. I'd like to assume Raid is off due to the fact I am able to add the drives to the array.

I did some searching and found this thread https://lime-technology.com/forum/index.php?topic=42806.0

I performed the following in an attempt to resolve the issue.

[*]Stop the array

[*]Unassign the disk

[*]Start the array

[*]Stop the array

[*]Assign the disk

[*]Start the array and parity build should start

WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) = Parity drive

It'll get to about 1.6% then the status goes to disabled.

unRAID Parity disk error: 30-01-2016 16:55
Alert [HYPERION] - Parity disk in error state (disk dsbl)
WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk)

unRAID array errors: 30-01-2016 16:55
Warning [HYPERION] - array has errors
Array has 6 disks with read errors

unRAID Parity sync:: 30-01-2016 16:55
Notice [HYPERION] - Parity sync: finished (431 errors)
Duration: unavailable (no parity-check entries logged)

Jan 30 19:40:08 Hyperion kernel: sd 1:0:7:0: [sdk] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Jan 30 19:40:08 Hyperion kernel: sd 1:0:7:0: [sdk] 4096-byte physical blocks
Jan 30 19:40:08 Hyperion kernel: sd 1:0:7:0: [sdk] Write Protect is off
Jan 30 19:40:08 Hyperion kernel: sd 1:0:7:0: [sdk] Mode Sense: 00 3a 00 00
Jan 30 19:40:08 Hyperion kernel: sd 1:0:7:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 30 19:40:08 Hyperion kernel: sdk: sdk1
Jan 30 19:40:08 Hyperion kernel: sd 1:0:7:0: [sdk] Attached SCSI disk
Jan 30 19:40:59 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:40:59 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:40:59 Hyperion emhttp: shcmd (: /usr/local/sbin/set_ncq sdk 1 &> /dev/null
Jan 30 19:43:41 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:43:41 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:43:42 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:43:42 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:43:42 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:43:42 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:43:48 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:43:48 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:43:50 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:43:50 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:44:01 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:44:01 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:44:15 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:44:15 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:44:15 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:44:15 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:44:25 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:44:25 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:44:27 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:44:27 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:44:35 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:44:48 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:45:06 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:45:06 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:45:07 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:45:07 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:45:11 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:45:11 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:45:33 Hyperion emhttp: WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 (sdk) 2930266584
Jan 30 19:45:33 Hyperion kernel: md: import disk0: [8,160] (sdk) WDC_WD30EFRX-68AX9N0_WD-WCC1T0738873 size: 2930266532

Jan 30 19:45:33 Hyperion emhttp: shcmd (252): /usr/local/sbin/set_ncq sdk 1 &> /dev/null
Jan 30 20:00:17 Hyperion kernel: sd 1:0:7:0: [sdk] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
Jan 30 20:00:17 Hyperion kernel: sd 1:0:7:0: [sdk] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 07 31 28 40 00 00 02 00 00 00
Jan 30 20:00:17 Hyperion kernel: blk_update_request: I/O error, dev sdk, sector 120662080

Jan 30 20:02:37 Hyperion emhttp: shcmd (297): /usr/local/sbin/set_ncq sdk 1 &> /dev/null
Jan 30 20:02:38 Hyperion emhttp: shcmd (305): /usr/local/sbin/set_ncq sdk 1 &> /dev/null
Jan 30 20:02:42 Hyperion emhttp: shcmd (313): /usr/local/sbin/set_ncq sdk 1 &> /dev/null
Jan 30 20:02:42 Hyperion emhttp: shcmd (321): /usr/local/sbin/set_ncq sdk 1 &> /dev/null

Any help would be greatly appreciated.

Just wanted to say thanks. I had a similar problem. After a bad shutdown I had two disks showing as disabled but had good SMART. After a Google search this forum post showed first. The whole answer of stop the array...... fixed my issues. I was ready my new disks! So thanks!

October 20, 2023

I also can see the need for this. I use Plex but it can't decode the sound that is used by the HDhomerun ATSC 3.0 tuner. Maybe it can do the standard channels but the new ATSC 3.0 stuff looks amazing. I have tried to see about Plex working on adapting to be able to handle ATSC 3.0.

ctsdad

Posts

Joined

Last visited

Content Type

Profiles

Forums

Downloads

Store

Gallery

Bug Reports

Documentation

Landing

Posts posted by ctsdad

Can't login to frontend (happens repeatedly after 2 weeks or so), Flash drive out of space?

[Solved] Parity Device is Disabled

HDHomerun DVR docker