Hoder

Hello, The plugin does not currently allow ring buffers to be set to 8192. This PR has been opened on the plugin repo: https://github.com/unraid/tips.and.tweaks/pull/1 Would it be possible for someone to review it? Many thanks.

I will ask the question in the plugin thread. But I understood that Unraid had taken over the development of this plugin, and I opened the pull request that is in my first post. My question was also unclear. I wasn't really asking if it was possible, but if the person or people now in charge of development could look at the PR in my first post. I will ask in the plugin thread.

Hello, I'm not sure if I'm in the right section of the forum. Would it be possible to increase the size of the ring buffers on the plugin to 8192? thx GitHubfeat: add 8192 as a selection to the NIC Rx and Tx buffer...My network card supports 8192 for ring buffers. The plugin only supports a maximum of 4096, which prevents me from increasing the value directly from the plugin and keeping this value. Summary by...

Hello, Thanks for your feedback, the problem seems to have been solved. I'm going to continue testing on my own.

Hello @JorgeB , No news on a possible solution to the problem? Or even a lead?

Hello, I've looked at the thread you gave, but it doesn't provide a definitive solution. I've tried creating an udev rule, but that doesn't solve the plugin problem. Do you have any information on what the plugin does? Or a way to tell the plugin to ignore this port?

Oh, thank you for your reply. I hadn't seen this post, but I looked for it (badly, in fact). I'll take a closer look.

Thank you for your feedback. I thought I was the only one ahah Just to add some information, if I add these parameters to my syslinux config ‘usbcore.autosuspend=-1 usb.use_lpm=0’, the error disappears but the slowdowns are still there.

root@hostname~:# lsusb -vt /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/16p, 480M ID 1d6b:0002 Linux Foundation 2.0 root hub |__ Port 002: Dev 002, If 0, Class=Human Interface Device, Driver=usbhid, 12M ID 1462:7d42 Micro Star International |__ Port 003: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M ID 05e3:0610 Genesys Logic, Inc. Hub |__ Port 004: Dev 005, If 0, Class=Mass Storage, Driver=usb-storage, 480M ID 0781:5567 SanDisk Corp. Cruzer Blade |__ Port 011: Dev 004, If 0, Class=Hub, Driver=hub/4p, 480M ID 05e3:0608 Genesys Logic, Inc. Hub /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/9p, 20000M/x2 ID 1d6b:0003 Linux Foundation 3.0 root hub I thought my usb was plugged into port 2-2, but I don't have a usb on port ‘2-2’? Originally, my usb was plugged into a 3.0 port when I got the error, so I moved my usb to a 2.0 port, but the error is still there if the plugin is installed.

Hello, I don't know how long I've had this problem, but as soon as I install the plugin I get an access error on my usb that loops around. This slows down my server and prevents me from accessing my disks. Here is an example: May 6 00:57:56 hostname kernel: br-[HASH]: port 20(veth[HASH]) entered disabled state May 6 00:57:56 hostname kernel: veth[HASH]: renamed from eth0 May 6 00:57:56 hostname kernel: br-[HASH]: port 20(veth[HASH]) entered disabled state May 6 00:57:56 hostname kernel: veth[HASH] (unregistering): left allmulticast mode May 6 00:57:56 hostname kernel: veth[HASH] (unregistering): left promiscuous mode May 6 00:57:56 hostname kernel: br-[HASH]: port 20(veth[HASH]) entered disabled state [... similar virtual networking lines ...] May 6 01:20:46 hostname plugin-manager: running: 'anonymous' May 6 01:20:46 hostname plugin-manager: running: 'anonymous' May 6 01:20:46 hostname plugin-manager: checking: /boot/config/plugins/dynamix.my.servers/node-linux-x64.tar.xz - SHA256 May 6 01:20:48 hostname plugin-manager: skipping: /boot/config/plugins/dynamix.my.servers/node-linux-x64.tar.xz already exists May 6 01:20:48 hostname plugin-manager: checking: /boot/config/plugins/dynamix.my.servers/pnpm-linuxstatic-x64 - SHA256 [... similar plugin verification lines ...] May 6 01:20:55 hostname root: Starting flash backup (if enabled) May 6 01:20:55 hostname root: Starting Unraid API May 6 01:20:55 hostname flash_backup: flash backup disabled, exiting May 6 01:21:08 hostname plugin-manager: dynamix.unraid.net.plg installed May 6 01:21:36 hostname kernel: xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command May 6 01:21:42 hostname kernel: xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command May 6 01:21:42 hostname kernel: usb 2-2: device not accepting address 2, error -62 [... similar USB error lines ...] May 6 01:23:02 hostname kernel: usb usb2-port2: unable to enumerate USB device May 6 01:25:33 hostname sshd-session[XXXX]: Connection from [IP_LOCAL] port [PORT] on [IP_SERVER] port [PORT] rdomain "" May 6 01:25:33 hostname sshd-session[XXXX]: Accepted password for root from [IP_LOCAL] port [PORT] ssh2 [... SSH session logs omitted ...] May 6 01:25:38 hostname elogind-daemon[XXXX]: Removed session 1. The error appears as soon as I install the plugin and disappears when I uninstall it. I've changed my usb, thinking that was the problem, but nothing changes. The 2-2 usb port is used by my main usb key.