drmindbender

thank you both!

one of my disk is getting errors. here is the result of the smart test result. is the disk dying? smartctl -a -d ata /dev/sdj smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green family Device Model: WDC WD20EADS-65R6B0 Serial Number: WD-WCAVY2137024 Firmware Version: 01.00A01 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jan 6 12:02:46 2014 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (41580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 170 146 021 Pre-fail Always - 8475 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3445 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 058 058 000 Old_age Always - 30827 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 110 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 58 193 Load_Cycle_Count 0x0032 152 152 000 Old_age Always - 144432 194 Temperature_Celsius 0x0022 112 098 000 Old_age Always - 40 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 7 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 3 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 4 inconsistent with error log pointer 3 ATA Error Count: 4 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 occurred at disk power-on lifetime: 30129 hours (1255 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 09 88 69 e0 Error: UNC 8 sectors at LBA = 0x00698809 = 6916105 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 07 88 69 e0 08 10d+08:32:32.406 READ DMA c8 00 08 d7 4a 69 e0 08 10d+08:32:32.401 READ DMA c8 00 08 37 3e 69 e0 08 10d+08:32:32.394 READ DMA c8 00 08 bf 00 00 e0 08 10d+08:32:32.372 READ DMA Error 3 occurred at disk power-on lifetime: 29040 hours (1210 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 0a 88 69 e0 Error: UNC 8 sectors at LBA = 0x0069880a = 6916106 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 07 88 69 e0 08 14d+16:43:05.462 READ DMA c8 00 08 bf 00 00 e0 08 14d+16:43:05.462 READ DMA ca 00 08 df 5d 00 e0 08 14d+16:43:03.651 WRITE DMA c8 00 08 df 5d 00 e0 08 14d+16:43:03.617 READ DMA Error 2 occurred at disk power-on lifetime: 28118 hours (1171 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 d8 4a 69 e0 Error: UNC 8 sectors at LBA = 0x00694ad8 = 6900440 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d1 08 d7 4a 69 e0 08 00:18:47.906 READ DMA c8 d1 08 37 3e 69 e0 08 00:18:47.899 READ DMA c8 d1 08 bf 00 00 e0 08 00:18:47.884 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

i am having the same issue. but when i disconnect all the power sata cables from the power supply, the machine boots into unraid. i have two power sata cables, each connected to 3 hard drives each. the machine will not boot when the drives are connected, even if i disconnect one and leave the other sata cable connected and vice versa. I have a SUPERMICRO MBD-X7SPE-HF-D525-O board and I have replaced the board with the another same board. both boards were new. i was able to boot unraid and try to set up my shares once early on. then, i needed to update to 5.0 and rebooted the machine. that is the last time it booted properly with the drives connected.

one last bump...just looking for help

as requested... I have been trying to export nfs shares. when I hit apply, it doesnt share it. it just goes back to do not export. I would have more details but the server is in maintenance mode right now syslog-2013-09-21.txt.zip

these shares are supposed to be shared/exported. Sometimes I have to go in and click "apply" to share them again? but it seems like I need to do this every time I restart the unraid server. thank you.

bump...

Is there a way to fix this? the request is coming from a Mac with os X 10.8.5 I am running unRaid 5.0 Sep 17 16:34:46 Nautilus last message repeated 3 times Sep 17 16:34:46 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/VMware (/): not exported Sep 17 16:34:46 Nautilus last message repeated 3 times Sep 17 16:34:47 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Backups (/): not exported Sep 17 16:34:47 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Backups (/): not exported Sep 17 16:34:47 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Applications (/): not exported Sep 17 16:34:47 Nautilus last message repeated 3 times Sep 17 16:34:47 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Backups (/): not exported Sep 17 16:34:47 Nautilus last message repeated 3 times Sep 17 16:34:47 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Downloads (/): not exported Sep 17 16:34:47 Nautilus last message repeated 3 times Sep 17 16:34:47 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Photos (/): not exported Sep 17 16:34:47 Nautilus last message repeated 3 times Sep 17 16:34:47 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/VMware (/): not exported Sep 17 16:34:47 Nautilus last message repeated 3 times Sep 17 16:34:56 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Applications (/): not exported Sep 17 16:34:56 Nautilus last message repeated 3 times Sep 17 16:34:56 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Backups (/): not exported Sep 17 16:34:56 Nautilus last message repeated 3 times Sep 17 16:34:56 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Downloads (/): not exported Sep 17 16:34:56 Nautilus last message repeated 3 times Sep 17 16:34:56 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Photos (/): not exported Sep 17 16:34:56 Nautilus last message repeated 3 times Sep 17 16:34:56 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/VMware (/): not exported Sep 17 16:34:56 Nautilus last message repeated 3 times Sep 17 16:35:06 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Applications (/): not exported Sep 17 16:35:06 Nautilus last message repeated 3 times Sep 17 16:35:06 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Backups (/): not exported Sep 17 16:35:06 Nautilus last message repeated 3 times Sep 17 16:35:06 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Downloads (/): not exported Sep 17 16:35:06 Nautilus last message repeated 3 times Sep 17 16:35:06 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Photos (/): not exported Sep 17 16:35:06 Nautilus last message repeated 3 times Sep 17 16:35:06 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/VMware (/): not exported Sep 17 16:35:06 Nautilus last message repeated 3 times Sep 17 16:35:16 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Applications (/): not exported Sep 17 16:35:16 Nautilus last message repeated 3 times Sep 17 16:35:16 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Backups (/): not exported Sep 17 16:35:16 Nautilus last message repeated 3 times Sep 17 16:35:16 Nautilus mountd[1788]: refused mount request from 10.0.1.26 for /mnt/user/Downloads (/): not exported Sep 17 16:35:16 Nautilus last message repeated 3 times

how are these EARX with unRaid? do I need to do anything different with these? running unraid 4.7

thank you. Started Stop will take the array off-line. Data-Rebuild in progress. Cancel will stop Data-Rebuild. WARNING: canceling Data-Rebuild will leave the array unprotected! that was pretty easy so far.

i have spare drives. there was a parity check running for days and was only at 17% so I stopped it. 1) I will shut down the machine. 2) I will locate the drive in the sever and remove it 3) insert new drive in same slot 4) then what? thanks

Statistics for /dev/sdp WDC_WD20EADS-65R_WD-WCAVY2234848 smartctl -a -d ata /dev/sdp smartctl version 5.38 [i486-slackware-linux-gnu] Copyright © 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD20EADS-65R6B0 Serial Number: WD-WCAVY2234848 Firmware Version: 01.00A01 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Aug 8 08:46:55 2012 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (43200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 198 198 051 Pre-fail Always - 250512 3 Spin_Up_Time 0x0027 156 143 021 Pre-fail Always - 9183 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2170 5 Reallocated_Sector_Ct 0x0033 091 091 140 Pre-fail Always FAILING_NOW 871 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19436 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 74 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 51 193 Load_Cycle_Count 0x0032 144 144 000 Old_age Always - 169600 194 Temperature_Celsius 0x0022 110 099 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 845 197 Current_Pending_Sector 0x0032 198 198 000 Old_age Always - 781 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 6 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 14 200 Multi_Zone_Error_Rate 0x0008 168 001 000 Old_age Offline - 6566 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

I have a SMART Failure predicted on hard disk 3. THe machine has not fully booted yet. I am running unRaid 4.7. Advice? I tried to search for smart failure predicted and did not get good results. Thank!

They can be plugged in independently. The thing is, plugging in *any* of them prevents the fans from spinning. And I do have a 2 year old.

I pulled all the disk and tried to start it. It will not start if any of the backplanes are connected. Are all 5 backplanes independent or are they connected somehow? I also tested with cables that are know to work (used the one to power the fan assembly). I also tested with the hdd controller cards pulled. It is always when the backplanes are plugged in that the fans and computer will not start up.