progrocktv

Okay, good. Thanks so much for your help!

Well I moved files from another disc on to the newly installed disc and I'm worried those newly moved files would be lost if I rebuild.

Okay, and that won't overwrite any existing files? (just want to make sure I don't lose anything?

Ah, okay. I'm moving files over to the drive now (with Unbalance) so what I'm thinking is I will movie all those files back on to other drives, let the drive rebuild and then move the files again? However since there would already be files on that drive, how would unbalance handle the duplicate files (skip, replace or other?)

That was my thought, here ya go. Thanks diagnostics-20240226-1223.zip

I'm in the process of converting my filesystem to XFS using the swap method described in the other post: -Using Unbalance I emptied all the data from one drive (4tb) but replaced it with a new 8TB drive. -Formatted the new drive to xfs & started the array, however it wanted to do a parity rebuild. -Stopped the parity rebuild and using Unbalance to move the contents from another disc in the array (which I will convert to xfs when empty and rinse and repeat until all the discs are converted. ) -however when moving files to the new disc is still has a yellow triangle and says (DEVICE CONTENTS EMULATED CLICK TO SPIN DOWN DEVICE) It looks like it wants to rebuild, but I just need to move files from the other disc over. Is there anything I can do to stop Unraid trying to do the rebuild, or will this triangle change to green once the files are moved on to it?

I recently installed PLEX Media Server docker on my Unraid system, I am trying to access the web UI again to configure it from the Dashboard (and also Docker page) but I’m now getting the error: "The connection was reset The connection to the server was reset while the page was loading. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer’s network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web." I tried reinstalling it and searching for this topic with no luck. Any idea why I am now getting this?

Alright, I'm probably jinxing things by posting this and it will go down tonight, but as of NOW things are working fine without any dropped connection problems. I'll keep an eye open and keep you posted if anything further happens. Thanks for all your help! Phil

Done. System rebooted without any problems. I'll keep an eye on it for the next few days and let you know if it cuts out again. Either way I'll keep you posted. Thanks, Phil

That would probably be my internet router. I have everything connected through the D-Link since it's a GB switch, but I have the D-Link connected to a wireless router which is connected to the cable modem. The wireless router only has my laptop, tablet, etc (since it's a "SLOWER" switch) but everything else is isolated together on the faster D-Link switch. I've renamed: the /boot(flash)/config/plugins directory the /boot(flash)/plugins directory the boot(flash)/extra/ and rebooted I started the management utility using the /usr/local/sbin/emhttp& command & it came back with [1] 1700 (I wasn't sure about the !/bin/bash, but it said it didn't recognize it anyways) Does this automatically use the stock GO file when I reboot? (sorry for so many questions) Thanks, Phil syslog.txt

I'm sorry, It's on a D-Link DGS-108 8-Port Gigabit Ethernet Switch (not a router, my bad) My server and computer are all on the same switch and everything worked no problem before when I had this configuration. I'm not sure if the "go file" is stock or not. I'm always a bit nervous of loosing the array so I haven't modified anything except for upgrading.

Looks like just this one was created but here ya go. syslog.zip

Attached is the IFCONFIG and ETHTOOL log I copied and pasted from telnet, however I couldn't find a directory for /var/log/ on my flash drive to get the other logs. Thanks, Phil ifconfig_ethtool_log.txt

Thanks, I'll pull them and post tonight. After this all started happening I did replace the router I was using, however no improvement. I'm thinking the next steps would probably be replacing the network cable and then if that doesn't work, the network card (I'm using the network's mobo port but have a spare gb network card.) I'm going to hold off though until you check the log. The back of the RAID enclosure is a bit tricky to get into (it's in a rack) but I'll see if we can pinpoint the problem before ripping everything apart. Thanks, Phil

Sorry for the delay, been out of town. Right now I'm running in safe mode. Still having problems with none of those are currently running. Current Syslog attached. Thanks, Phil syslog.zip