filetree

I knew that was gonna be it. Thank you!

A couple weeks ago (during the hurricane) I lost power for an hour or two and was not home. Recently moved in, so UPS was not being used. I came back and drive 10 was emulated, and instead of trying to figure out what was wrong, I just figured rebuilding would be quicker. Turns out, that was wrong. It's been going about 1-5MB/s, and i've started it over a few times trying different things. i tested each disk speed separately, and all showed fine speeds. I ordered new hba cards (have 2 9201 and a 9211, not sure which combo of 2 is in this server), so I'll be able to test that soon. I have another 14TB to replace it with and maybe try to rebuild it on that if it doesn't get faster tonight. Attached diagnostics fileserver-diagnostics-20221011-2146.zip

Extended SMART test completed without error, but heres the diagnostics. fileserver-diagnostics-20220405-1247.zip

Thanks, I've done that. Is there a good test for the drive to see if it is the issue and needs to be replaced?

Hopefully this is more helpful... fileserver-diagnostics-20220402-2014.zip

Diagnostic from before reboot after the issue occured. fileserver-diagnostics-20220331-0655.zip

So need to get them after it happens next time before I reboot? Or is there a way to get them further back?

My install has been running fine for a while. Just recently upgraded the parity to 14TB and replaced a 4TB with the old 12TB parity. I also moved my docker image and app data to the cache drive. It was after that I noticed that after a while (usually seems to be overnight) my shares disappear. Data is still all there, but things like Plex/etc can't seem to access it. As well as SMB shares. Oh and a restart fixes it just fine. Google wasn't much help, so I'm posting here attached diagnostics fileserver-diagnostics-20220329-1503.zip

I agree, it does not make sense. Especially because some stuff was the same (torrent clients still had torrents in them), but some stuff like sonarr/radarr were wiped clean. I'm about to move everything over to a new chassis and upgrade parity drive, so I may just start 1000% clean docker image.

Hmm so I did that, but now maybe 1/3 of the docker apps I had installed are showing up under Previous Apps. I have done this before and they all showed up. Is there a way to "fix" this? It looks like they're all still in /appdata/ EDIT: looks like they all loaded back themselves into the docker image somehow? just came back an hour later and they're there

Yes, I've googled and searched the forums and could not find anything to help. I had weird issues with a drive that randomly had xfs error, unmountable. ran xfs_repair and it fixed it, happened again a week or two later and xfs_repair fixed it. (No SMART errors or anythng) Thinking it may have been a cable issue, but moving the entire system to a different chassis so I'll find that out then. Now everything seems to be fine, but when I go to Docker I get "Docker Service failed to start." Rebooted and getting nothing. attached diagnostics. fileserver-diagnostics-20220207-1252.zip