Gryman

Hello, I'm trying to get Seafile 12 running after I found my old container no longer maintained. I'm not seeing anyone else run into the issue I am now. It looks like Seafile has a user/pass defined but it's incorrect. Where is this variable defined so I can reset the password? verifying password of user root ... done verifying password of user seafile ... Failed to connect to mysql server using user "seafile" and password "***": Access denied for user 'seafile'@'172.18.0.3' (using password: YES)

Thanks, I appreciate it. I'll work on setting up the reporting after I reboot my system in about 8 hours, once the parity check finishes as last night Docker hungup the array and I wasn't able to get a clean shutdown. On a side note, I have all of my docker instances running off the NVME drives for speed. Should just be using these as cache drives to help reduce the chance of data loss? I'm currently using SSD's for this purpose, and the NVMEs are just for Docker.

Sorry about that: UUID: f00cb2bb-b4d2-4e4d-8f8b-167ee6f6be26 Scrub started: Wed Dec 20 08:36:25 2023 Status: finished Duration: 0:02:47 Total to scrub: 724.04GiB Rate: 4.33GiB/s Error summary: verify=2389 csum=1170601 Corrected: 1172990 Uncorrectable: 0 Unverified: 0

root@Zeus:~# btrfs scrub start -rdB /mnt/nvme Scrub device /dev/nvme0n1p1 (id 1) done Scrub started: Wed Dec 20 08:00:50 2023 Status: finished Duration: 0:03:25 Total to scrub: 362.03GiB Rate: 1.77GiB/s Error summary: no errors found Scrub device /dev/nvme1n1p1 (id 2) done Scrub started: Wed Dec 20 08:00:50 2023 Status: finished Duration: 0:02:09 Total to scrub: 180.32GiB Rate: 1.40GiB/s Error summary: verify=2913 csum=1170601 Corrected: 0 Uncorrectable: 0 Unverified: 0 Scrub device /dev/nvme2n1p1 (id 3) done Scrub started: Wed Dec 20 08:00:50 2023 Status: finished Duration: 0:02:11 Total to scrub: 181.71GiB Rate: 1.39GiB/s Error summary: no errors found root@Zeus:~#

Hello, I've attached the diagnostics. I noticed that some of my containers weren't working and then saw in the logs that the FS went RO. After further inspection, I saw a lot of BTRFS errors. If anyone could point me in the right direction I would be very grateful. root@Zeus:~# btrfs dev stat -z /mnt/nvme [/dev/nvme0n1p1].write_io_errs 0 [/dev/nvme0n1p1].read_io_errs 0 [/dev/nvme0n1p1].flush_io_errs 0 [/dev/nvme0n1p1].corruption_errs 0 [/dev/nvme0n1p1].generation_errs 0 [/dev/nvme1n1p1].write_io_errs 0 [/dev/nvme1n1p1].read_io_errs 0 [/dev/nvme1n1p1].flush_io_errs 0 [/dev/nvme1n1p1].corruption_errs 1172369 [/dev/nvme1n1p1].generation_errs 3659 [/dev/nvme2n1p1].write_io_errs 0 [/dev/nvme2n1p1].read_io_errs 0 [/dev/nvme2n1p1].flush_io_errs 0 [/dev/nvme2n1p1].corruption_errs 0 [/dev/nvme2n1p1].generation_errs 0 zeus-diagnostics-20231219-2129.zip

Hello, I have a newer install of Unraid (6.9.2) as I'm moving away from an older Ubuntu server. ASRock X399 Phantom Gaming 6 AMD Threadripper 2950X 64GB RAM Sapphire 5700XT Nitro+ 8GB Everything is working great, except for when I try to do GPU passthrough on a VM. Currently, if I set a vbios for my GPU, it won't allow the VM to start or stop properly, and eventually I can no longer access any functionality related to the VM system. I have to do a hard reset of the server as the system will not gracefully shutdown with the VM still running as it cannot unmount media, etc, etc. I've also noticed that now when I build a new VM, the VNC server doesn't seem to work anymore, even if the QXL adapter is the only video device assigned. I've attached the diagnostic file and here is a video of the actually occurrence which is repeatable. I've tried two different vbios files both from https://www.techpowerup.com zeus-diagnostics-20220226-0858.zip