fleondelarosa

I have a supermicro X11SSL-CF, this plugin was working fine for a long time but suddenly my fans are full speed whole time. I read all posts here, full remove plugin, new install, did the line 53 change for case 13 in confg file, set virtual machine (i don´t have it)... tried everything, run out of ideas, need help, please. I didn´t find any good log where i could take a look for new clues, any ideas? thanks Update just now: i found this in the fan control log: 2024-10-30 15:07:00 Fan:Temp, FAN1234(19%):CPU Temp(31C), FANA(15%):HDD Temp(28C) it says 19% and 15%, i asume speed, but they are running full speed FAN1234 to 2400 RPM and FANA 4800 RPM. Could be this related?

Sorry, forgot the screenshoot. But when you said that i am using the old ipmifan file..... uhm... that should be the problem, just need to know where to find it, google doesn´t help me.

Hi @Fisherman, Thanks for your advice but of course that is done, my Fan are set to Full Speed. I check internet before asking for help here. For me, looks like i have the wrong ipmifan file, do you know where to find the updated version?

@SimonF, sorry, i was offline some days. What do you mean with the old ipmfan old version? that it is the one I had from the beginning and it was working before the update to 6.12. Where can i find the new version. I did some Gooogle without luck. And yes, the speed fun issue had it in the past and i solved it, but came back after the update. In any case, whay the GUI says Fan control stopped when I enable it? Regards

Ok, one more thing. Using the IPMI web site of my motherboard, I put the fans at standard speed (quiet), but now they are speeding up and down, looks like if Unraid are forcing them to go at full speed (your software or my wrong ipmifan file) but IPMI web site said, no, you have to be standard speed at quiet level. I hope this information can help, @SimonF From the hot Munich city.....

The Fan control is not working at all. Which ipmifan file should I use? i have the X11SSL-CF mb. The Fans are always at full speed. I tried many restarts but not working, it is strange. As I said, before, it was working without problems. Everything is wrong after the update to Unraid 6.12. I would like to help here, I think that we have an issue @SimonF, just let me know what i should check. The logs from your application doesn´t say anything, just this: 2023-06-18 15:47:31 Starting Fan Control 2023-06-18 15:47:31 Setting fans to full speed 2023-06-18 15:47:41 Fan:Temp, FAN1234(16%):CPU Temp(44°C), FANA( 8%):HDD Temp(0°C) 2023-06-18 15:49:01 Fan:Temp, FAN1234(16%):CPU Temp(35°C), FANA(27%):HDD Temp(41°C) 2023-06-18 15:49:18 Stopping Fan Control 2023-06-18 15:49:18 Setting fans to auto Said that fans to auto but I got this in the GUI: Fan Control: Stopped. Fun are running at full speed all the time. HD and CPU are in green, not hot temperature (of course, the fans are running at full speed). In any case, it is now very hot here in Munich, Mein Gott!! Looking forward for any feedback @SimonF Regards Felipe

Fan control is stopped, i don´t get it on, i looked everywhere. I used always this command with every server restart, is it still needed, right? curl -o '/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' -L 'https://raw.githubusercontent.com/lucasteligioridis/IPMI-unRAID/master/source/ipmi/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' && chmod 755 '/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' I have everything ok, readings working, connected via IPMI...... I run out of ideas. Any feedback will be welcome.

My mistake, i didn´t check that notifications and fan control has to be disable to be able to edit. Thanks @SimonF

Yes, it works! removing the password parameter in config file, makes visible the settings tab, BUT, the IPMI setting fields are disable and connection to my IPMI address failed. I have the /usr/local/emhttp/plugins/ipmi/include/ipmi_options.php with $netsvc === 'disable' and in ipmi_settings_fan.php under fan network option too, disable. In the past, those were needed for me to be able to see settings tab and edit the options, i have to do it with every server restart. Thanks in any case @SimonF, at least I see now the settings tab, I will continuos with the investigation, let me know if you have any other idea. Regards

I need help, please. Before updating to 6.12, i had ipmi tool working fine in my supermicro x11. Now, I updated to 6.12 and install the new ipmi tool but when i got to Settings-> IPMI, I got the IPMI settings page blank. I check the config file for the plugin and everything sees good. Any ideas? Thanks