wuudogg
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by wuudogg
-
-
This is really great. Was looking for a way to keep certain *arrs from running wild and downloading too many very high quality linux ISO downloads daily. Was trying to do this in sabnzbd as it isn't native in most of the *arr apps. This might be the ticket. Thanks
-
1
-
-
Ordered two of the pictured units to test.
These are found on eBay/Aliexpress.
Blue PCB
Brass/Gold colored hardware features
Can confirm that the units pictured do contain ASPM1153e chip.
They do not contain unique GUID/UUID. Creation tool fails outright. Default ID is full of zeros.
THE FOLLOWING UNITS DO NOT CONTAIN A UNIQUE IDENTIFIER. THEY DO NOT MEET CURRENT REQUIREMENTS. THEY ARE REJECTED BY MEDIA CREATION TOOL.
-
On 3/14/2024 at 12:31 AM, CyrIng said:
About the UI glitches, I don't catch how to reproduce them.
My understanding is that Windows and Virtualization are the starting points of the issue.
To clarify, tested on Windows 11 Pro Hosts and VM Guests. Virtualization is not a requirement to reproduce. Tried Firefox, Chrome and Edge. All give the same result of the borders missing when I use Unraid Gui and run corefreq-cli from the Unraid Gui Terminal window. Doesn't happen if I use MobaXterm and ssh in.
-
Came here for this for VMs. Will knock about with it this weekend. Thanks.
-
Appreciate all of the effort provided by the devs to improve this script and your consideration for multiple firmware versions. It seems I have to reinstall and reconfigure the Mover Tuning plugin after boot with 6.12.8 in order for it to work. A minor inconvenience and worth it to get the full power of Mover Tuning. If the soft link is the only issue, was thinking of putting a section of your post-install script in 'User Scripts" at 'Startup of Array'. Does this seem a reasonable temporary workaround?
#!/bin/bash echo "The 'post-install' script" echo "Backup current mover binary, command may fail depending on version of unRAID" echo "" echo "Creating Soft link for 6.12 RC8 or newer since /usr/local/sbin/move is now lcoated in /usr/local/bin/move" if [[ ! -e /usr/local/sbin/move ]]; then ln -s /usr/local/bin/move /usr/local/sbin/move; fi echo "Done" -
20 hours ago, CyrIng said:
There's an odd issue with the UI I'm noticing in your previous screenshot: the borders of the Settings window are missing on the sides and get width extended on the above.
I can't tell yet if it is a `corefreq-cli` bug or some side effects of the employed screenshot software (SW) tool ?
Are those issues visibly permanent on your screen ?
By which mean are you displaying the UI ?
ssh or other remote SW ?
X or console Terminal SW ?
Is the term color theme modified or default ?
Interesting. Those were taking from a host RDP'd into a VM. Was thinking maybe PEBKAC on my part.
So, I've attached another with the Kernal window this time. Straight from the Unraid GUI Window Terminal. Windows Snipping Tool. Tried it from Firefox and Chrome. I don't see those nice royal blue boxes like in your pic again. I tried from a few different windows system thinking maybe it was a dark mode or a browser addon. Tried on a new / fresh system and no royal blue outline still. Even tried Microsoft Edge lol. No borders.
Running 6.12.8 and the plugin is installed and up to date.
Second pic, with the boxes/borders is through Mobaxterm window... Boxes are there.
-
19 hours ago, CyrIng said:
That's such an improvement.
How did you measure the whole power consumed ?
State of the art, highly sensitive measurement tool: aka $8 KASA / TAPO Energy Plug
Seems to update every second or two.
Whole power consumed was measured after initial boot and all docker, VMs and HDDs were up. Tried Stock settings, AMD/Perf, AMD/Schedutil, tried all the scaling governors. All were about the same until following your process for making corefreq_tsc the clock source and properly registering all. No real stress tests other than I was working and doing too many things at once, as usual.
- Drives are set to spin down on their own (Standby set to 15min).
- I use the Folder Caching plugin to help keep the drives in standby.
- I prevent Disk Location plugin from running Smart Queries hourly. Daily is fine. If a drive dies, it dies. No need to wake it up and ask it if it is dieing. Not saying it is but that plugin has been a little goofy lately. Love it though!
- Mover Tuning plugin, with moves to array based on fullness and file age, helps keep HDDs in standby for non critical data that can easily be rebuilt.
The tweaking comes in waves. It's nice sometimes to see the uptime counter hit 30 or 60 days. This isn't one of those weeks. Having too much fun right now goofing around with it. I'm prepping to consolidate another system and add its drives.
-
Thank you for all of these details above@CyrIng
Running:
AMD 3900x
MSI Meg Ace x570
GTX 1660Super (Docker only. Plex/Frigate/Tdarr)
Mellanox ConnectX3 2 ports @ 10gb
Onboard 2.5 Realtek
KB/M
LSI 9211-8i
9x HDDs
2x NVME
1xSSD
Sonoff Zigbee 3.0 USB Module
Running 20 docker containers with multiple ARRs
2 Windows 10/11 VMs
1 Home Assistant VM
raid:~# corefreq-cli -s -n -m -n -M -n Processor [AMD Ryzen 9 3900X 12-Core Processor] |- Architecture [Zen2/Matisse] |- Vendor ID [AuthenticAMD] |- Firmware [ 46.73.0-2] |- Microcode [0x08701030] |- Signature [ 8F_71] |- Stepping [ 0] |- Online CPU [ 24/ 24] |- Base Clock [ 99.999] |- Frequency (MHz) Ratio Min 2199.98 < 22 > Max 3799.97 < 38 > |- Factory [100.000] 3800 [ 38 ] |- Performance |- P-State TGT 3799.97 < 38 > |- CPPC Min 500.00 < 5 > Max 4599.96 < 46 > TGT 4599.96 < 46 > |- Turbo Boost [ UNLOCK] XFR 4699.96 [ 47 ] CPB 4599.96 [ 46 ] 1C 2799.98 < 28 > 2C 2199.98 < 22 > |- Uncore [ LOCK] CLK 1599.99 [ 16 ] MEM 4799.96 [ 48 ] Instruction Set Extensions |- 3DNow!/Ext [N/N] ADX [Y] AES [Y] AVX/AVX2 [Y/Y] |- AVX512-F [N] AVX512-DQ [N] AVX512-IFMA [N] AVX512-PF [N] |- AVX512-ER [N] AVX512-CD [N] AVX512-BW [N] AVX512-VL [N] |- AVX512-VBMI [N] AVX512-VBMI2 [N] AVX512-VNNI [N] AVX512-ALG [N] |- AVX512-VPOP [N] AVX512-VNNIW [N] AVX512-FMAPS [N] AVX512-VP2I [N] |- AVX512-BF16 [N] AVX-VNNI-VEX [N] AVX-FP128 [N] AVX-FP256 [Y] |- BMI1/BMI2 [Y/Y] CLWB [Y] CLFLUSH [Y] CLFLUSH-OPT [Y] |- CLAC-STAC [Y] CMOV [Y] CMPXCHG8B [Y] CMPXCHG16B [Y] |- F16C [Y] FPU [Y] FXSR [Y] LAHF-SAHF [Y] |- MMX/Ext [Y/Y] MON/MWAITX [Y/Y] MOVBE [Y] PCLMULQDQ [Y] |- POPCNT [Y] RDRAND [Y] RDSEED [Y] RDTSCP [Y] |- SEP [Y] SHA [Y] SSE [Y] SSE2 [Y] |- SSE3 [Y] SSSE3 [Y] SSE4.1/4A [Y/Y] SSE4.2 [Y] |- SERIALIZE [N] SYSCALL [Y] RDPID [Y] UMIP [Y] |- VAES [N] VPCLMULQDQ [N] PREFETCH/W [Y] LZCNT [Y] Features |- 1 GB Pages Support 1GB-PAGES [Capable] |- 100 MHz multiplier Control 100MHzSteps [Missing] |- Advanced Configuration & Power Interface ACPI [Capable] |- Advanced Programmable Interrupt Controller APIC [Capable] |- Advanced Virtual Interrupt Controller AVIC [Capable] |- APIC Timer Invariance ARAT [Capable] |- LOCK prefix to read CR8 AltMov [Capable] |- Clear Zero Instruction CLZERO [Capable] |- Core Multi-Processing CMP Legacy [Capable] |- L1 Data Cache Context ID CNXT-ID [Missing] |- Collaborative Processor Performance Control CPPC [Capable] |- Direct Cache Access DCA [Missing] |- Debugging Extension DE [Capable] |- Debug Store & Precise Event Based Sampling DS, PEBS [Missing] |- CPL Qualified Debug Store DS-CPL [Missing] |- 64-Bit Debug Store DTES64 [Missing] |- Fast Short REP MOVSB FSRM [Missing] |- Fast-String Operation ERMS [Missing] |- Fused Multiply Add FMA4 [Missing] |- Fused Multiply Add FMA [Capable] |- Hardware Lock Elision HLE [Missing] |- Hyper-Threading Technology HTT [Capable] |- Hardware P-state control HwP [Capable] |- Instruction Based Sampling IBS [Capable] |- Instruction INVLPGB INVLPGB [Missing] |- Instruction INVPCID INVPCID [Missing] |- Long Mode 64 bits IA64 | LM [Capable] |- LightWeight Profiling LWP [Missing] |- Memory Bandwidth Enforcement MBE [Capable] |- Machine-Check Architecture MCA [Capable] |- Instruction MCOMMIT MCOMMIT [Missing] |- Model Specific Registers MSR [Capable] |- Memory Type Range Registers MTRR [Capable] |- No-Execute Page Protection NX [Capable] |- OS-Enabled Ext. State Management OSXSAVE [Capable] |- OS Visible Work-around OSVW [Capable] |- Physical Address Extension PAE [Capable] |- Page Attribute Table PAT [Capable] |- Pending Break Enable PBE [Missing] |- Process Context Identifiers PCID [Missing] |- Perfmon and Debug Capability PDCM [Missing] |- Page Global Enable PGE [Capable] |- Page Size Extension PSE [Capable] |- 36-bit Page Size Extension PSE36 [Capable] |- Processor Serial Number PSN [Missing] |- Resource Director Technology/PQE RDT-A [Capable] |- Resource Director Technology/PQM RDT-M [Capable] |- Read Processor Register at User level RDPRU [Capable] |- Restricted Transactional Memory RTM [Missing] |- Safer Mode Extensions SMX [Missing] |- Self-Snoop SS [Missing] |- Supervisor-Mode Access Prevention SMAP [Capable] |- Supervisor-Mode Execution Prevention SMEP [Capable] |- Trailing Bit Manipulation TBM [Missing] |- Translation Cache Extension TCE [Capable] |- Time Stamp Counter TSC [Invariant] |- Time Stamp Counter Deadline TSC-DEADLINE [Missing] |- TSX Force Abort MSR Register TSX-ABORT [Missing] |- TSX Suspend Load Address Tracking TSX-LDTRK [Missing] |- User-Mode Instruction Prevention UMIP [Capable] |- Virtual Mode Extension VME [Capable] |- Virtual Machine Extensions VMX [Missing] |- Write Back & Do Not Invalidate Cache WBNOINVD [Capable] |- Extended xAPIC Support x2APIC [ xAPIC] |- AVIC controller for x2APIC x2AVIC [Missing] |- XSAVE/XSTOR States XSAVE [Capable] |- xTPR Update Control xTPR [Missing] |- Extended Operation Support XOP [Missing] Mitigation mechanisms |- Indirect Branch Restricted Speculation IBRS [ Unable] |- IBRS Always-On preferred by processor [ Unable] |- IBRS preferred over software solution [Capable] |- IBRS provides same speculation limits [Capable] |- Indirect Branch Prediction Barrier IBPB [Capable] |- Single Thread Indirect Branch Predictor STIBP [ Enable] |- Speculative Store Bypass Disable SSBD [Capable] |- SSBD use VIRT_SPEC_CTRL register [ Unable] |- SSBD not needed on this processor [ Unable] |- No Branch Type Confusion BTC_NO [ Unable] |- BTC on Non-Branch instruction BTC-NOBR [ Enable] |- Limited Early Redirect Window AGENPICK [Disable] |- Arch - No Fast Predictive Store Forwarding PSFD [ Unable] |- Arch - Enhanced Predictive Store Forwarding EPSF [Missing] |- Arch - Cross Processor Information Leak XPROC_LEAK [ Enable] Security Features |- CET Shadow Stack features CET-SS [Missing] |- Secure Init and Jump with Attestation SKINIT [Capable] |- Secure Encrypted Virtualization SEV [Capable] |- SEV - Encrypted State SEV-ES [Capable] |- SEV - Secure Nested Paging SEV-SNP [Missing] |- Guest Mode Execute Trap GMET [Capable] |- Supervisor Shadow Stack SSS [Missing] |- VM Permission Levels VMPL [Missing] |- VMPL Supervisor Shadow Stack VMPL-SSS [Missing] |- Secure Memory Encryption SME [Capable] |- Transparent SME TSME [Disable] |- Secure Multi-Key Memory Encryption SME-MK [Missing] |- DRAM Data Scrambling Scrambler [ Enable] Technologies |- Instruction Cache Unit |- L1 IP Prefetcher L1 HW IP < ON> |- Data Cache Unit |- L1 Prefetcher L1 HW < ON> |- Cache Prefetchers |- L2 Prefetcher L2 HW < ON> |- L1 Stride Prefetcher L1 Stride <OFF> |- L1 Region Prefetcher L1 Region <OFF> |- L1 Burst Prefetch Mode L1 Burst <OFF> |- L2 Stream HW Prefetcher L2 Stream <OFF> |- L2 Up/Down Prefetcher L2 Up/Down <OFF> |- System Management Mode SMM-Lock [ ON] |- Simultaneous Multithreading SMT [ ON] |- PowerNow! CnQ [ ON] |- Core C-States CCx [ ON] |- Core Performance Boost CPB < ON> |- Watchdog Timer WDT < ON> |- Virtualization SVM [ ON] |- I/O MMU AMD-V [ ON] |- Version [ 0.1] |- Hypervisor [OFF] |- Vendor ID [ N/A] Performance Monitoring |- Version PM [ 1] |- Counters: General Fixed | { 6, 6, 4 } x 48 bits 3 x 64 bits |- Enhanced Halt State C1E <OFF> |- C2 UnDemotion C2U <OFF> |- C3 UnDemotion C3U < ON> |- Core C6 State CC6 < ON> |- Package C6 State PC6 < ON> |- Legacy Frequency ID control FID [OFF] |- Legacy Voltage ID control VID [OFF] |- P-State Hardware Coordination Feedback MPERF/APERF [ ON] |- Core C-States |- C-States Base Address BAR [ 0x413 ] |- ACPI Processor C-States _CST [ 2] |- MONITOR/MWAIT |- State index: #0 #1 #2 #3 #4 #5 #6 #7 |- Sub C-State: 1 1 0 0 0 0 0 0 |- Monitor-Mwait Extensions EMX [Capable] |- Interrupt Break-Event IBE [Capable] |- Core Cycles [Capable] |- Instructions Retired [Capable] |- Reference Cycles [Capable] |- Last Level Cache References [Capable] |- Global Time Stamp Counter [Missing] |- Data Fabric Performance Counter [Capable] |- Core Performance Counter [Capable] |- Processor Performance Control _PCT [ Enable] |- Performance Supported States _PSS [ 3] |- Performance Present Capabilities _PPC [ 0] |- Continuous Performance Control _CPC [ Enable] Power, Current & Thermal |- Temperature Offset:Junction TjMax [ 49: 95 C] |- CPPC Energy Preference EPP [Missing] |- Digital Thermal Sensor DTS [Capable] |- Power Limit Notification PLN [Missing] |- Package Thermal Management PTM [Missing] |- Thermal Monitor 1 TTP [ Enable] |- Thermal Monitor 2 HTC [ Enable] |- Thermal Design Power TDP [ 105 W] |- Minimum Power Min [ 105 W] |- Maximum Power Max [ 105 W] |- Thermal Design Power Package < Enable> |- Power Limit PL1 < 142 W> |- Time Window TW1 < 0 ns> |- Power Limit PL2 < 500 W> |- Time Window TW2 < 0 ns> |- Thermal Design Power Core [Disable] |- Power Limit PL1 [ 0 W] |- Time Window TW1 [ 0 ns] |- Thermal Design Power Uncore [Disable] |- Power Limit PL1 [ 0 W] |- Time Window TW1 [ 0 ns] |- Thermal Design Power DRAM [Disable] |- Power Limit PL1 [ 0 W] |- Time Window TW1 [ 0 ns] |- Thermal Design Power Platform [Disable] |- Power Limit PL1 [ 0 W] |- Time Window TW1 [ 0 ns] |- Power Limit PL2 [ 0 W] |- Time Window TW2 [ 0 ns] |- Package Power Tracking PPT [ 142 W] |- Electrical Design Current EDC [ 140 A] |- Thermal Design Current TDC [ 95 A] |- Core Thermal Point |- Package Thermal Point |- Thermal Monitor Trip Limit [ 115 C] |- HTC Temperature Limit Limit [ 127 C] |- HTC Temperature Hysteresis Threshold [ 2 C] |- Units |- Power watt [ 0.125000000] |- Energy joule [ 0.000015259] |- Window second [ 0.000976562] CPU Pkg Apic Core/Thread Caches (w)rite-Back (i)nclusive # ID ID CCD CCX ID/ID L1-Inst Way L1-Data Way L2 Way L3 Way 000:BSP 0 0 0 0 0 32 8 32 8 512 8 i 65536 16w 001: 0 2 0 0 1 0 32 8 32 8 512 8 i 65536 16w 002: 0 4 0 0 2 0 32 8 32 8 512 8 i 65536 16w 003: 0 8 0 1 4 0 32 8 32 8 512 8 i 65536 16w 004: 0 10 0 1 5 0 32 8 32 8 512 8 i 65536 16w 005: 0 12 0 1 6 0 32 8 32 8 512 8 i 65536 16w 006: 0 16 1 2 8 0 32 8 32 8 512 8 i 65536 16w 007: 0 18 1 2 9 0 32 8 32 8 512 8 i 65536 16w 008: 0 20 1 2 10 0 32 8 32 8 512 8 i 65536 16w 009: 0 24 1 3 12 0 32 8 32 8 512 8 i 65536 16w 010: 0 26 1 3 13 0 32 8 32 8 512 8 i 65536 16w 011: 0 28 1 3 14 0 32 8 32 8 512 8 i 65536 16w 012: 0 1 0 0 0 1 32 8 32 8 512 8 i 65536 16w 013: 0 3 0 0 1 1 32 8 32 8 512 8 i 65536 16w 014: 0 5 0 0 2 1 32 8 32 8 512 8 i 65536 16w 015: 0 9 0 1 4 1 32 8 32 8 512 8 i 65536 16w 016: 0 11 0 1 5 1 32 8 32 8 512 8 i 65536 16w 017: 0 13 0 1 6 1 32 8 32 8 512 8 i 65536 16w 018: 0 17 1 2 8 1 32 8 32 8 512 8 i 65536 16w 019: 0 19 1 2 9 1 32 8 32 8 512 8 i 65536 16w 020: 0 21 1 2 10 1 32 8 32 8 512 8 i 65536 16w 021: 0 25 1 3 12 1 32 8 32 8 512 8 i 65536 16w 022: 0 27 1 3 13 1 32 8 32 8 512 8 i 65536 16w 023: 0 29 1 3 14 1 32 8 32 8 512 8 i 65536 16w Zen UMC [1440] Controller #0 Dual Channel Bus Rate 1600 MHz Bus Speed 1599 MHz DDR4 Speed 3199 MT/s Cha CL RCDr RCDw RP RAS RC RRDs RRDl FAW WTRs WTRl WR clRR clWW #0 18 22 22 22 42 73 6 8 34 4 12 24 5 5 #1 18 22 22 22 42 73 6 8 34 4 12 24 5 5 CWL RTP RdWr WrRd scWW sdWW ddWW scRR sdRR ddRR drRR drWW drWR drRRD #0 18 12 8 3 1 7 6 1 5 4 0 0 0 0 #1 18 12 8 3 1 7 6 1 5 4 0 0 0 0 REFI RFC1 RFC2 RFC4 RCPB RPPB BGS:Alt Ban Page CKE CMD GDM ECC #0 12480 880 560 416 0 0 OFF ON R1W1 0 8 1T ON 0 #1 12480 880 560 416 0 0 OFF ON R1W1 0 8 1T ON 0 MRD:PDA MOD:PDA WRMPR STAG PDM RDDATA WRD WRL RDL XS XP CPDED #0 8 16 24 24 24 255 0:F:0 13 2 13 26 896 10 4 #1 8 16 24 24 24 255 0:F:0 13 2 13 26 896 10 4 DIMM Geometry for channel #0 Slot Bank Rank Rows Columns Memory Size (MB) #0 #1 16 2 131072 1024 32768 TEAMGROUP-UD4-3600 DIMM Geometry for channel #1 Slot Bank Rank Rows Columns Memory Size (MB) #0 #1 16 2 131072 1024 32768 TEAMGROUP-UD4-3600
I now have everything registered properly per your instructions to include the blacklist:
On 3/8/2024 at 3:50 AM, CyrIng said:modprobe.blacklist=acpi_cpufreq amd_pstate.shared_mem=0 amd_pstate=disable idle=halt
My power consumption:
Was 175-180W with most HDDs spun down. 220-230W with them spun up.
Now 110-120W with most HDDs spun down. 170W with them all spun up.
No delays, no errors.
-
1
-
-
Excelent advice here. Also try to use passive DACs for your short connections as it will result in significant power and heat savings.
-
I have a pair of mSata adapters, sitting at customs right now, that also allegedly has GUID. Different board manufacturer, pcb not the same as the ones you've showed here. Has the ASM1153E Chip. Will share URL if it works out.
*Already downloaded your thingiverse files. Thank you for sharing. Hoping they might fit. Clean work with an Ender 3 @Miss_Sissy
-
1
-
-
And no, if you keep logging errors or having a problem, you only will need to replace the single drive that is failing.
-
Shut down dockers and vms and 'stop' the array. Click on the disk and Run Extended Smart. Smart is a great tool but won't catch every possible drive failure scenario, even extended.
Since you have already stopped the array, might as well take her all the way down and reseat the cables. Shut down and remove power. Reseat:
HDD if using a backplane
Power cables
Data cables
Reseat the HBA in the PCI slot if you have one
-
Jorge is on target. Working as designed. The 1TB Blue 570 has a pretty small static cache, then performance drops off a cliff. https://www.tomshardware.com/reviews/wd-blue-sn570-review/2. Your testing seems to concur with the testing from Tom's.
-
1
-
-
Sab wrench tests are meh. You arent going to get lab theoretical performance using sab wrench test behind an unraid docker. Try directly copying some files between your nvme drives using the unraid gui and observe performance. Don't use SMB as it adds overhead.
-
1
-
-
Boom. Working as designed. I set a trim to run weekly or monthly on my heavy hitter NVMEs. Set to run after mover has had time time to execute. Use the Scheduler app. My download nvme take the most abuse and files aren't actually deleted from the storage cells when mover runs. They are only marked for deletion. Trim forces those marked cells available again. If your nvme workload is more static, you can set it to run less often.
-
Have you run a trim on them lately?
-
Really excited to try this out. Been having problems with getting mover tuning to run 12.6 or 12.8. Only standard mover seems to be triggering when forced from a share. I will take some time to try the script for sure. Love the idea of moving some data from the performance tier to the capacity tier based on age. Brilliant.
-
Going down the rabbit hole today with a manufacturer recertified Seagate Exos X22 ST20000NM004E from serverpartdeals. Unraid 6.12.8. LSI 9211-8i running P20. Threw errors minutes after Parity build completed. Suspecting EPC / power controls etc. Appreciate the details shared by all in the thread.
Update: Was not able to disable using the standard seachest utilities. Others have mentioned similar issues. Maybe removed ?
Was however able to use OpenSeaChest utilities in Windows to disable EPC on this specific drive. https://github.com/Seagate/openSeaChest/releases . v23.12 on Win64.
Pulled the drive out of unraid just to work on it standalone in a different system. Decided to try Windows 11 for fun.
Not everybody is an expert Linux Sysadmin so here are some screenshots to try and disable EPC on Seagate EXOS in Windows 10/11.
Download and unzip the contents of openSeaChest for windows. Move the unzipped file folder somewhere easy for you to manuever from command line. I moved my folder to the c:\ drive. I renamed the folder c:\openSeaChest.
Open a windows command prompt terminal as admin and Change Directory to the file folder location of your openSeaChest executables. Inside you will find all of the application tools.
C:\openSeaChest>dir Volume in drive C has no label. Volume Serial Number is EAF4-51CF Directory of C:\openSeaChest 02/19/2024 11:31 AM <DIR> . 12/01/2023 05:29 PM <DIR> man 12/01/2023 05:28 PM 991,232 openSeaChest_Basics.exe 12/01/2023 05:28 PM 975,872 openSeaChest_Configure.exe 12/01/2023 05:28 PM 1,000,960 openSeaChest_Erase.exe 12/01/2023 05:28 PM 907,776 openSeaChest_Firmware.exe 12/01/2023 05:28 PM 972,288 openSeaChest_Format.exe 12/01/2023 05:28 PM 935,424 openSeaChest_GenericTests.exe 12/01/2023 05:28 PM 1,039,360 openSeaChest_Info.exe 12/01/2023 05:28 PM 928,768 openSeaChest_Logs.exe 12/01/2023 05:28 PM 960,512 openSeaChest_NVMe.exe 12/01/2023 05:28 PM 997,376 openSeaChest_PassthroughTest.exe 12/01/2023 05:28 PM 953,344 openSeaChest_PowerControl.exe 12/01/2023 05:28 PM 906,752 openSeaChest_Reservations.exe 12/01/2023 05:28 PM 917,504 openSeaChest_Security.exe 12/01/2023 05:29 PM 1,135,616 openSeaChest_SMART.exe 12/01/2023 05:29 PM 891,904 openSeaChest_ZBD.exe 15 File(s) 14,514,688 bytes 2 Dir(s) 486,452,842,496 bytes free
Next was to scan for devices on my system using -s switch
openSeaChest_Basics.exe -s
C:\openSeaChest>openSeaChest_Basics.exe -s ========================================================================================== openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled Copyright (c) 2014-2023 Seagate Technology LLC and/or its Affiliates, All Rights Reserved openSeaChest_Basics Version: 3.5.4-6_2_0 X86_64 Build Date: Dec 1 2023 Today: Mon Feb 19 11:32:59 2024 User: admin ========================================================================================== Vendor Handle Model Number Serial Number FwRev SATA PD0 ST20000NM004E-3HR103 xxxxxxxx SN01 NVMe PD1 SHPP41-2000GM xxxxxxxxxxxxxxxxx 51060A20 NVMe PD2 Samsung SSD 980 PRO 1TB xxxxxxxxxxxxxxxxx 5B2QGXA7'PD0' is the Seagate SATA Drive I'm targeting to make changes to. You may have a different device Handle.
Next was to get more specific information on device PD0 using the -i command where xxx is your device.
openSeaChest_Basics.exe -d xxx -i
C:\openSeaChest>openSeaChest_Basics.exe -d PD0 -i ========================================================================================== openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled Copyright (c) 2014-2023 Seagate Technology LLC and/or its Affiliates, All Rights Reserved openSeaChest_Basics Version: 3.5.4-6_2_0 X86_64 Build Date: Dec 1 2023 Today: Mon Feb 19 11:33:29 2024 User: admin ========================================================================================== \\.\PhysicalDrive0 - ST20000NM004E-3HR103 - xxxxxxxxx - SN01 - ATA Model Number: ST20000NM004E-3HR103 Serial Number: xxxxxxxxx Firmware Revision: SN01 World Wide Name: xxxxxxxxxxxxxxxxx Date Of Manufacture: Week 35, 2023 Drive Capacity (TB/TiB): 20.00/18.19 Native Drive Capacity (TB/TiB): 20.00/18.19 Temperature Data: Current Temperature (C): 25 Highest Temperature (C): 32 Lowest Temperature (C): 24 Power On Time: 2 days 14 hours Power On Hours: 62.00 MaxLBA: 39063650303 Native MaxLBA: 39063650303 Logical Sector Size (B): 512 Physical Sector Size (B): 4096 Sector Alignment: 0 Rotation Rate (RPM): 7200 Form Factor: 3.5" Last DST information: DST has never been run Long Drive Self Test Time: 1 day 4 hours 34 minutes Interface speed: Max Speed (Gb/s): 6.0 Negotiated Speed (Gb/s): 6.0 Annualized Workload Rate (TB/yr): 2923.26 Total Bytes Read (GB): 88.00 Total Bytes Written (TB): 20.60 Encryption Support: Not Supported Cache Size (MiB): 512.00 Read Look-Ahead: Enabled Write Cache: Enabled Low Current Spinup: Disabled SMART Status: Good ATA Security Information: Supported, Frozen Firmware Download Support: Full, Segmented, Deferred Specifications Supported: ACS-4 ACS-3 ACS-2 ATA8-ACS ATA/ATAPI-7 ATA/ATAPI-6 ATA/ATAPI-5 SATA 3.3 SATA 3.2 SATA 3.1 SATA 3.0 SATA 2.6 SATA 2.5 SATA II: Extensions SATA 1.0a ATA8-AST Features Supported: Sanitize SATA NCQ SATA Software Settings Preservation [Enabled] SATA Device Initiated Power Management Power Management Security SMART [Enabled] 48bit Address HPA Security Extension PUIS GPL Streaming SMART Self-Test SMART Error Logging Write-Read-Verify DSN AMAC EPC [Enabled] Sense Data Reporting SCT Write Same SCT Error Recovery Control SCT Feature Control SCT Data Tables Host Logging Set Sector Configuration Storage Element Depopulation + Restore Field Accessible Reliability Metrics (FARM) Seagate In Drive Diagnostics (IDD) Adapter Information: Adapter Type: PCI Vendor ID: 8086h Product ID: 7AE2h Revision: 0011hRunning the -i command showed: EPC [Enabled]
also showed: Low Current Startup: Disabled
Can be verified by also running openSeaChest_PowerControl.exe -d xxx -i
Now time to disable EPC by running:
openSeaChest_PowerControl.exe -d xxx --EPCfeature disable (Disables EPC where xxx is your device)
C:\openSeaChest>openSeaChest_PowerControl.exe -d PD0 --EPCfeature disable ========================================================================================== openSeaChest_PowerControl - openSeaChest drive utilities - NVMe Enabled Copyright (c) 2014-2023 Seagate Technology LLC and/or its Affiliates, All Rights Reserved openSeaChest_PowerControl Version: 3.4.0-6_2_0 X86_64 Build Date: Dec 1 2023 Today: Mon Feb 19 11:37:53 2024 User: admin ========================================================================================== \\.\PhysicalDrive0 - ST20000NM004E-3HR103 - xxxxxxxx - SN01 - ATA Successfully Disabled EPC Feature Set on \\.\PhysicalDrive0.Confirmed that EPC was now disabled by running -i switch again from _Basics or PowerControl information. Also did a full power down (not reboot) to fully reset the hard drive and drive mainboard. The settings stuck. Confirmed below as EPC no longer shows EPC [Enabled]
C:\openSeaChest>openSeaChest_Basics.exe -d PD0 -i ========================================================================================== openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled Copyright (c) 2014-2023 Seagate Technology LLC and/or its Affiliates, All Rights Reserved openSeaChest_Basics Version: 3.5.4-6_2_0 X86_64 Build Date: Dec 1 2023 Today: Mon Feb 19 11:42:34 2024 User: admin ========================================================================================== \\.\PhysicalDrive0 - ST20000NM004E-3HR103 - xxxxxxxx - SN01 - ATA Model Number: ST20000NM004E-3HR103 Serial Number: xxxxxxxxx Firmware Revision: SN01 World Wide Name: xxxxxxxxxxxxxx Date Of Manufacture: Week 35, 2023 Drive Capacity (TB/TiB): 20.00/18.19 Native Drive Capacity (TB/TiB): 20.00/18.19 Temperature Data: Current Temperature (C): 30 Highest Temperature (C): 32 Lowest Temperature (C): 24 Power On Time: 2 days 14 hours Power On Hours: 62.00 MaxLBA: 39063650303 Native MaxLBA: 39063650303 Logical Sector Size (B): 512 Physical Sector Size (B): 4096 Sector Alignment: 0 Rotation Rate (RPM): 7200 Form Factor: 3.5" Last DST information: DST has never been run Long Drive Self Test Time: 1 day 4 hours 34 minutes Interface speed: Max Speed (Gb/s): 6.0 Negotiated Speed (Gb/s): 6.0 Annualized Workload Rate (TB/yr): 2923.26 Total Bytes Read (GB): 88.00 Total Bytes Written (TB): 20.60 Encryption Support: Not Supported Cache Size (MiB): 512.00 Read Look-Ahead: Enabled Write Cache: Enabled Low Current Spinup: Disabled SMART Status: Good ATA Security Information: Supported, Frozen Firmware Download Support: Full, Segmented, Deferred Specifications Supported: ACS-4 ACS-3 ACS-2 ATA8-ACS ATA/ATAPI-7 ATA/ATAPI-6 ATA/ATAPI-5 SATA 3.3 SATA 3.2 SATA 3.1 SATA 3.0 SATA 2.6 SATA 2.5 SATA II: Extensions SATA 1.0a ATA8-AST Features Supported: Sanitize SATA NCQ SATA Software Settings Preservation [Enabled] SATA Device Initiated Power Management Power Management Security SMART [Enabled] 48bit Address HPA Security Extension PUIS GPL Streaming SMART Self-Test SMART Error Logging Write-Read-Verify DSN AMAC EPC Sense Data Reporting SCT Write Same SCT Error Recovery Control SCT Feature Control SCT Data Tables Host Logging Set Sector Configuration Storage Element Depopulation + Restore Field Accessible Reliability Metrics (FARM) Seagate In Drive Diagnostics (IDD) Adapter Information: Adapter Type: PCI Vendor ID: 8086h Product ID: 7AE2h Revision: 0011hlowCurrentSpinup was already Disabled by default for this drive.
If you need to disable Low Current Spinup you can try to do so with this command where xxx is your device Handle using their Configure utility:
openSeaChest_Configure.exe -d xxx --lowCurrentSpinup disable
openSeaChest_Configure.exe -d xxx --lowCurrentSpinup disableHope it helps others. Good luck.
-
Works great on 6.12.6. Thanks Dev.
Seems to update every second or two.
[Plugin] Mover Tuning
in Plugin Support
Posted
Confirmed the softlink alone doesn't work. Have to remove plugin and then reinstall plugin and adjust any settings to get mover working after reboot.