Austin Detzel

I am still getting more and more errors and issues, such as 500 http errors, so i attached another diagnostitower-diagnostics-20230328-2329.zipc file here

I recenly have had nothing but problems with unraid. Heres what has been going on. I first started noticing my cache was filling up, so I went to the discord group for some help. There I was recommended to upgrade my parity drives. I did. I did notice a increase in speeds but the good news was short. I started having docker images locking up on me. So I made a backup of my docker image and deleted the old one. I thought okay this must be the end of it... Not in any way. I had even more problems. So i tried uploading the old docker image back up, 10GB went great then it stopped. And it stopped completely, unraid locked up. So i reset and tried again, same thing happened. now when trying to install docker images Unraid will totally lock up to the extent that I need to do a hard reset. Its been over a week i've pulled several all nighters trying to get this server back online. I dont know what to do now. tower-diagnostics-20230328-2211.zip

My apologies for the late reply. I did read through all of your comments but needed a proper opportunity to take the server offline. The fastboot seemed to work for me. Many thanks to everyone.

No, it still will not boot unless the drive is moved.

Hello, I am trying to get unraid to boot more smoothly. I don't have issues with it running but if the system needs to restart it will not restart unless I move the flash drive to a different port each time. It seems weird but I can move it back and fourth between two ports each time it boots and have no problems, but if the drive is not moved Unraid simply will not boot up. Looking for suggestions on how to fix this problem. The system is running a MSI690 with a I9-12900k 64GB RAM, Nvidia 3070TI and many storage drives.

tower-diagnostics-20221223-1459.zip

Hello, I have a windows VM that I am trying to pass through a USB 3.1 PCie controller, I have tried several different models but continue to keep getting code 43. "Windows has stopped this device because it has reported problems." The VM is running up to date Windows 11 with 8 cores and 16GB of memory. It seems as though it continues to connect and disconnect until it fails. There is a 3080ti attached that is working fine, just problems with the USB controllers. Not sure where I am going wrong.

Full Reboot, and no luck

Sure thing root@Server1:~# fdisk -l /dev/nvme1n1 Disk /dev/nvme1n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors Disk model: Samsung SSD 970 EVO Plus 1TB Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/nvme1n1p1 2048 1953525167 1953523120 931.5G 83 Linux root@Server1:~#

Still no luck only 537MB, seems really strange. Everything detects the 1TB disk but it wont useit.

root@Server1:~# fdisk -l /dev/nvme1n1 Disk /dev/nvme1n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors Disk model: Samsung SSD 970 EVO Plus 1TB Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes root@Server1:~#

Okay, so I stopped the array ran 'blkdiscard -f /dev/nvme1n1' and this was the response root@Server1:~# blkdiscard -f /dev/nvme1n1 blkdiscard: Operation forced, data will be lost! root@Server1:~#

I did this and I am still only showing a disk size of 537MB Also, attached diagnostics. Thanks for the help. server1-diagnostics-20220907-1251.zip

Hello, I am new to unraid I setup a cache drive but its only using 475MB of my 1TB NVMe Drive. I am a bit confused and not sure where to go. Any support would be appreciated. Thanks! Please see the attached image.