4l65e

Bios update didn't change the behavior, however I'm not getting the errors in syslog after moving the 2 SSDs to a couple of the other 6 ports. I'm not sure what SATA controller MSI used for ports 7 and 8, but there's something weird with it.

Using 6.11.3 I just moved my system from an ASUS B85M-E motherboard with an i7 4790 to an MSI PRO B550-VC with a Ryzen 5 4600G processor. There were only 6 SATA ports on the old board, so I was using a 2 port Asmedia ASM1061 card for 2 of my hard drives. This was working just fine, but I can never leave well enough alone; so here we are. It seemed like everything moved perfectly to the new system, but then I got a CRC error on an SSD plugged into port 8 on the board. That's when I checked the syslog and noticed some errors. At that time it was only the one port giving errors in the log. I tried moving that drive to another cable and port on the motherboard, but the error persisted on port 8. Then I replaced the SATA cable for port 8 and moved some drives around in the chassis. Now I have errors on ports 7 and 8. I believe sdh and sdi are port 7 and 8 on the motherboard. I'm going to update the bios on this motherboard, but I'm not sure what to do to troubleshoot these errors. Any help is very much appreciated. unraid-diagnostics-20230811-1751.zip