Cupid

I found the issue. You're right. Hardware related Fractal Design AIO Cooler Recall Thanks, everyone.

Would you suggest I install and run cinebench?

Perhaps. but I don't know what else to do. I used a different cooler as well and it was still the same result with all dockers closed. Should a plugin really be taking up that much CPU power?

I reapplied it twice. Everything seems back to normal now that I removed cache directory and net data. htop said those were taking up 140% of my cpu power. Has anyone else had something like this before?

It's the CPU overheating. Crashing because of it. Right now it seems to have been fixed after I removed that cache directory and netdata. If it happens again, I'll do that. Thank you.

It did it again after removing the directory cache plugin. syslog-192.168.0.103.log

I did some troubleshooting on my own and found when I removed my second HBA card every thing was fine temperature wise. Obviously I had some missing disks. I looked at the CPU usage with htop and it said SHFS was using 100%. I don't know what that is, but other posts talked about the dynamix directory cache plugin. I have disabled it and everything seems to be much better. Less usage and normal temperatures. syslog-192.168.0.103.log

Hello, helpful community. I have noticed the past few days my machine's CPU fan (AIO cooler) has been on high at times when I feel it shouldn't. The only demanding thing it runs is a Plex docker. It was even running high when only one stream was playing and also running on high when nothing was playing. It also had an unclean shutdown last night. I can't find it in the settings to save syslogs. Has that setting moved with the update? I can only get the syslogs after I restarted. What do you think could be the problem? Hardware or software? Thank you for all your support. tower-diagnostics-20240114-1157.zip

This seems to have fixed the problem. Thank you! Is there anything else I should do? I have attached my updated diagnostics. tower-diagnostics-20230725-0043.zip

I've added me diagnosis, but it's after restoring to my previous version. When I updated and when I restored, unraid wouldn't shut down my system by itself and I had to do a hard reset both times. Could that be a clue? tower-diagnostics-20230704-2127.zip

I recently updated UNraid to 6.12.2 from 6.11.5 and ever since it's been very slow in several areas. Mainly the GUI. Even logging in takes about 60 seconds for everything to load and up to 120-240 seconds to see my drives. Plex is no longer playing movies either. Accessing shares through the network has also been slowed down a lot. Should I restore to the old version? I've been trying to download the diagnosis for 10 minutes and it still isn't doing it. Has anyone else experienced this?

I just tested that. I unplugged the UPS and ran a few dockers to put a load on the CPU to run down the battery faster. I was logged into the gui and it said the UPS is below threshold and is shutting down. I now have it set to 65% batter and 35 minutes. 0 for the seconds on battery. I restarted it and there was no parity check. So that's good. Maybe I had the settings wrong? Could it be that the UPS/Unraid is being tricked during a power outage since the power usually flickers for a few seconds before actually cutting out?

I will try that.

Yes. Everything is fine if I just shut it down myself or restart it from the gui

Hello. What have I configured wrong? My power goes out about 4 times a month. It's horrible. I have an APC UPS model: BR1000G. Every time the power goes out, when I power things back on, a parity check is always started. Today when the power went out, I checked the server and it was still on because of the UPS. Then shut off like 10-15 minutes later. I assumed it did a proper shut down. I was wrong I guess. Edit: The "Time left on battery before shutdown" is set to 15 here, but in the past it's been disabled (set to 0) and the same thing occurs. Thank you. tower-diagnostics-20230401-1251.zip