ralop

I get those speed with 80-90gb files and with 9000mtu it does go to 700-800mt/s range. Was just wondering if you had the same problem and had to change settings in unraid or card itself

Yet another question, did you have to change your mtu to 9000 from 1500 in the network settings to get correct speeds with the intel nic? For some reason my mellanox gave me around 700-800 speeds with the 1500 setting but intel only gets around 100-120?

"This plugin modifies stock system files and may cause issues with your system" So how save is this to use these days on 6.12.6 version?

Okay, Thank you for your help

So something like this should work i am guessing? dac cables

Sorry for posting in english on a german sub but i have been looking at that same intel card on ebay and i am wondering what brand cables you are using with it? Been reading that intel seems to be picky about cables used with them?

How reliable are the power consumption numbers broadcom advertises? Looking at their site 9500-16i uses almost the same amount power than my current 9207-8i

These guys have a pretty good list about different psu's efficiencies https://www.cybenetics.com/index.php?option=whats-new

Because i could not get exit node come up in the setting of the admin panel, i re-installed everything and used ibracorbs guide. Until i used the tailscale set --advertise-exit-node line it would not come up

So what causes this notification? Been trying to get tailscale to work but sometimes its fine and sometimes it starts to give that "error". Maybe that is the cause why i can not get the streaming to work on jellyfin Tailscale Health Linux DNS config not ideal. /etc/resolv.conf overwritten. See https://tailscale.com/s/dns-fight Commands i used when i installed the tailscale tailscale set --advertise-exit-node --advertise-routes=192.xxx.xx.x/xx,192.xxx.xxx.x/xx echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.conf sudo sysctl -p /etc/sysctl.conf

So what is the difference between EDACerton`s plugin and dsmith44`s plugin?

Is there away to disable the parity disc with the new config setting without losing data on the data drives? If there is can someone write a step by step on how to. Like a n00b i run the parity before moving my files to the server and now the transfer speed are really slow because parity and i have around 80tb to transfer. Only seeing around 50-100Mt/s while transferring files

Is there people here using Intel i5-9600k on their server. How is your power comsumption and what kinda setup other hardware wise? How good is the performance transcoding 4k hdr remux content?

Is Intel res3tv360 and 9300-8i still a good working combo with unraid?

Why isn't the integrated gpu on your cpu enough for that use? assuming you still have the i3-7350k cpu