Roosteyr

I can watch movies fine using software encoding but as soon as I enabled HW encoding using my 5700xt I began to experience massive stuttering which made movies unwatchable. I discovered it was actually only occurring when subtitles were enabled by the jellyfin user. Subtitles off no issues. When they are on totally unwatchable but sound is not effected. The video seems to repeat the same sequence for about 10 seconds then move to next sequence a repeat. I've been followed this post as a general guide to get HW encoding working. So I've enabled AMD driver in Unraid mkdir /boot/config/modprobe.d touch /boot/config/modprobe.d/amdgpu.conf And edited the /boot/config/go file to include the following lines. modprobe amdgpu chmod -R 777 /dev/dri In the jellyfin docker container I added "--device=/dev/dri" in the Extra Parameters field. In the Jellyfin webui under Dashboard > Playback, I set hardware acceleration to "Video Acceleration API (VAAPI)" and set VA API Device to "/dev/dri/renderD128" I've tried disabling "Allow subtitle extraction on the fly" and have both enabled disabled "Enable fallback fonts". I've not sure if setting a "Fallback font folder path" would help or even what files to dump in that folder. I've attached my jellyfin logs to confirm the error. Has anyone experienced this issue does anyone know of a good solution? For now I supposed I will be disabling subtitles. JellyLogs.txt

I've tried installing photonix on my unraid server using the docker app available. I selected my photos folder on the sever and otherwise went with the default settings. I can't connect to the server using http://localhost:8080. I've tried changing the port settings to no avail. Looking at the logs it seems I'm getting this error at every login. photonix_postgres11: forward host lookup failed: Unknown host Postgres is unavailable - sleeping Unsure as to why. I will uninstall the docker app and try the manual install.

Thank you genuinely for taking the time to write such detailed response. I knew about the sleep bug and had intended to passthrough a pci USB controler but wanted to take it one problem at a time and get the GPU passthrough working first. With your help I was able to get everything done in one go. Someone should take this or something because ive read a lot of post addressing gpu with a 5700xt and you covered everything and then some. I had some issues booting in legacy mode but after resolving that I followed your instructions through to the second reboot. At that point I switched on the old VM I had previously configured just to see if it work and it worked perfectly. Everything is working flawlessly now. Really great getting that annoying sleep bug fix and being able to switch on and off different vm's using the 5700xt. Again thanks a ton.

I've been trying to resolve this code 43 error on my unraid server that I've been experiencing with my 5700xt but can't seem to get it resolved so that I can have a working VM with proper screen resolution. I've updated vbios to the lastest version for my 5700xt from the techpowerup website but that resolved nothing. I'm using Q35-7.1 have the GPU selected as the sound card and am also passing vbios through unraid. I've read all the forums I can find on the subject but can't seem to get pass this code 43 error. Loving unraid besides this issue. My hardware info and VM xml are below. Any ideas? Hardware: Model:Custom M/B:ASUSTeK COMPUTER INC. PRIME A520M-A II Version Rev X.0x - s/n: 210180524100050 BIOS:American Megatrends Inc. Version 2423. Dated: 08/10/2021 CPU:AMD Ryzen 7 2700 Eight-Core @ 3200 MHz HVM:Enabled IOMMU:Enabled Cache:768 KiB, 4 MB, 16 MB Memory:32 GiB DDR4 (max. installable capacity 128 GiB) Network:bond0: fault-tolerance (active-backup), mtu 1500 Kernel:Linux 5.19.17-Unraid x86_64 OpenSSL:1.1.1s GPU: Gigabyte 5700XT Gaming OC <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='1'> <name>Slave1</name> <uuid>2ac27d48-726f-3c1c-4503-f7224b407706</uuid> <description>For slave stuff I mean work.</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>12582912</memory> <currentMemory unit='KiB'>12582912</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='4'/> <vcpupin vcpu='1' cpuset='12'/> <vcpupin vcpu='2' cpuset='5'/> <vcpupin vcpu='3' cpuset='13'/> <vcpupin vcpu='4' cpuset='6'/> <vcpupin vcpu='5' cpuset='14'/> <vcpupin vcpu='6' cpuset='7'/> <vcpupin vcpu='7' cpuset='15'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-7.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/2ac27d48-726f-3c1c-4503-f7224b407706_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv mode='custom'> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='4' threads='2'/> <cache mode='passthrough'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Slave1/vdisk1.img' index='3'/> <backingStore/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <alias name='virtio-disk2'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Windows.iso' index='2'/> <backingStore/> <target dev='hda' bus='sata'/> <readonly/> <boot order='2'/> <alias name='sata0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.225-2.iso' index='1'/> <backingStore/> <target dev='hdb' bus='sata'/> <readonly/> <alias name='sata0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x8'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x9'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0xa'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0xb'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0xc'/> <alias name='pci.5'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x4'/> </controller> <controller type='pci' index='6' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='6' port='0xd'/> <alias name='pci.6'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x5'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:da:5f:22'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio-net'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-1-Slave1/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'> <alias name='input0'/> </input> <input type='keyboard' bus='ps2'> <alias name='input1'/> </input> <audio id='1' type='none'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/> </source> <alias name='hostdev0'/> <rom file='/mnt/user/public share/Gigabyte.RX5700XT.8192.190909.rom'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/> </source> <alias name='hostdev1'/> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc52f'/> <address bus='1' device='5'/> </source> <alias name='hostdev2'/> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x413c'/> <product id='0x2003'/> <address bus='1' device='3'/> </source> <alias name='hostdev3'/> <address type='usb' bus='0' port='2'/> </hostdev> <memballoon model='none'/> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain>