rmzachar

That didn't change anything. I did end up installing a 2.5g PCI card and it picked it up fine. Not sure what the onboard issue is but didn't feel like spending much time on it since I don't really need to use both.

I'm assuming it has something to do with this with my 4 onboard ports. Still googling around here, but maybe someone knows the cause. Feb 4 14:17:53 SuperMicro kernel: igb: probe of 0000:07:00.0 failed with error -13 Feb 4 14:17:53 SuperMicro kernel: igb: probe of 0000:07:00.1 failed with error -13 Feb 4 14:17:53 SuperMicro kernel: igb: probe of 0000:07:00.2 failed with error -13 Feb 4 14:17:53 SuperMicro kernel: igb: probe of 0000:07:00.3 failed with error -13

Hello, trying to figure out what is causing my issue here. In short, if I want to use the onboard 1gb LAN on the motherboard I cannot have the PCI 10gbe card installed. If I want to only use the 10gbe PCI card, then everything is ok -- if I want to use the onboard LAN port then I have to remove the PCI card completely. I want to be able to use the onboard NIC without having to completely remove the PCI card to do so. So far I have: Unplug 10gbe cable and plug in ethernet to onboard lan port. No IP address gets assigned. I have deleted network.cfg to see if that would help and it did not. Removed the 10gbe PCI card and tested the onboard LAN port. IP was assigned and no issues there. Connect the 10gbe card to a switch. IP was assigned and no issues. Plug ethernet into onboard LAN while PCI card is installed (tried card in multiple slots), no IP address assigned. No option to set a network priority. I was trying to connect the server to a router via ethernet and then direct connect the 10gbe card to a a different PC, but I can't get the IP to assign the way it currently is going. Any help is appreciated. Diagnostics attached. supermicro-diagnostics-20240204-1423.zip