valamas

EDIT: Took time but now appearing!

Thank you. I am now formatting. The other drive I hit an X-Icon next to the naming box. Now it shows format which I am willing to go through (There was no data). Will report back later. nas-diagnostics-20181115-0728.zip

NEW POST: Greyed out MOUNT and FORMAT buttons I have two drives one formatted one not. For both drives, buttons MOUNT and FORMAT are greyed out. UNRAID v6.6.5 Unassigned Devices: 2018.11.10a up-to-date All installed plugins are up to date Array is started and not other issues noticed (problem is the same if not started) Have rebooted the server numerous times. Default UD settings unchanged thank you, Mike (EDIT) Diagnosti cs nas-diagnostics-20181115-0728.zip

I was able to trace that 101 was from the machine by checking the router logs that show the same nic mac address. I then ran a continuous ping in two dos prompts to the 7 ip and the 101 ip simultaneously. I then powered down and powered up the machine to see the ping not respond and re-respond and they did as described. 101 is a dhcp address and is not allocated to the mac address through the router.

Hi, Unraid: v5.0.5 My Unraid box has two ip addresses. A static one defined in settings as 192.168.0.7. However, I have traced 192.168.0.101 to the same machine. 101 is a DHCP address. Why is this happening? Here is my network config # Generated settings: USE_DHCP="no" IPADDR="192.168.0.7" NETMASK="255.255.255.0" GATEWAY="192.168.0.1" DHCP_KEEPRESOLV="no" DNS_SERVER1="192.168.0.1" DNS_SERVER2="" DNS_SERVER3="" BONDING="no" BONDING_MODE="1" The is no mention of ip address 101 or DHCP in the log, only ip 7 My motherboard is a Intel DP43TF.

After reviewing the syslog. It appeared there was a corruption represented as permission errors. Following the forum post from BRIT fixed the problem. http://lime-technology.com/forum/index.php?topic=7470.0

hi, v5.05 (Please read the background further down so see if it is relevant.) Samba file share. My user-share "MyShare" is not showing any files or folders. However, "MyShare" is present as a folder under each disk# and each is showing a list of files and folders present on that disk. How can I fix the situation without the risk of losing my files? Have tried a powerdown and restart. "MyShare" appears in the administrative console as a share under the shares tab. Has default settings, nothing special. When browsing using the webgui, no files or folders are shown for that share. Copying a file to the user-share does not show that file in the user-share. However, looking into the appropriate /disk#/MyShare and I see the file there. Background Last night a drive failed. I had a brand new one standing by and swapped it, rebuilt the data from the parity and ran a parity check. So everything is fine except my user-share is showing empty.

Apologies. Wish i set notify to see your reply sooner. I just upgraded my friend. Here is the page: http://lime-technology.com/wiki/index.php/Upgrade_Instructions Section: 5.0-rc9 through 5.0-rc16c In summary, this is all i did. Copied the bzimage, bzroot and syslinux folder. I did not modify any syslinix files in the root (as the instruction refers to the CFG).

Can someone PLEASE update the FAQ? It says only copy the syslinux.cfg. I found this forum because i thought it unusual to only copy the cfg without having a syslinux folder on my flash drive to begin with.