I also have the same problem than X1pheR (system fans shows OK, but no temperature reading)
The command "sensors" is working well in the terminal and I gel this:
Linux 4.1.7-unRAID.
root@Alligator:~# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +35.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +35.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +33.0°C (high = +80.0°C, crit = +100.0°C)
it8728-isa-0a30
Adapter: ISA adapter
in0: +1.13 V (min = +0.00 V, max = +3.06 V)
in1: +2.04 V (min = +0.00 V, max = +3.06 V)
in2: +2.03 V (min = +0.00 V, max = +3.06 V)
in3: +2.03 V (min = +0.00 V, max = +3.06 V)
in4: +0.01 V (min = +0.00 V, max = +3.06 V)
in5: +1.74 V (min = +0.00 V, max = +3.06 V)
in6: +1.50 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.38 V (min = +0.00 V, max = +6.12 V)
Vbat: +3.07 V
fan1: 1004 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: -128.0°C (low = +127.0°C, high = +127.0°C) sensor = disabled
temp3: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
intrusion0: ALARM
Here are my settings
Config folder:
go file:
sensors.conf file
Can anyone check and confirm if there is anything wrong?
thanks a lot!