Rkpaxam

was the cpu fixed that but still cant get passthrough working

Hi All i have finally gotten a cpu capable of supporting passthrough, i have gone through activated the IMMO groups and turned everything on (Far as im aware) !ut i still for the life of me cant get the screen to show up on my TV.... can anyone help a brother play super mario sunshine !

it was corrupeted anyway

its also saying its "formatting" the corrupted disk(s) but its been running an hour plus... how long should it take ?

couldnt manage that o had to do a hard reset tower-diagnostics-20230508-1625.zip

how do i do that if i cant log in?

any ideas how to get around this? i had a disk failure yesterday so ive had to move stuff around now i cant log into the gui but i should have 4tb+ free space?

Where did you find that I'm going to look for an alternative..... all this for lugies mansion lol

I think I found it my i7-2600k doesn't appear to support immou

Its showing as disabled in there but its showing as active in the bios. Created from the download diagnostics in tools, could be I attached the wrong file lol

Hi Andy i found i had PCIE ACS Override i unset this from "both" to Disabled but this hasnt helped either.

HI Andy doesnt appear to be showing up - but again its being read in the bios fine 8086:0100]00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) [8086:0101]00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) [8086:0122]00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) [8086:1c3a]00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) [8086:1c3c]00:16.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family IDE-r Controller (rev 04) [8086:1c3d]00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) [8086:1502]00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04) [8086:1c2d]00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) [8086:1c20]00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) [8086:1c10]00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) [8086:1c1c]00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) [8086:1c26]00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) [8086:244e]00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4) [8086:1c4e]00:1f.0 ISA bridge: Intel Corporation Q67 Express Chipset LPC Controller (rev 04) [8086:1c02]00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller (rev 04) [8086:1c22]00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) [1002:68bf]01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper PRO [Radeon HD 6750] [1002:aa58]01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series] [1b21:1064]02:00.0 SATA controller: ASMedia Technology Inc. Device 1064 (rev 02) [1033:0194]03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) [11c1:5811]04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70)

im now in a position where "read-check" looks to of stalled but because its "active" i cant do anything at all and i dont want to force shut down the system again.

Hi ive been having some major issues since i had a few powercuts im expecting its corrupted something but im not sure how to fix. If i click anything like reboot, shut down, cancel, spin up/down , stop/start whilst i get the warnings nothing actually. im also getting now daily crashes where i cant access the gui and i have to force shut down the system and its causing me issues as i have my dns setup inside docker so my whole house goes down.

maybe it was me being think i just resetup my laptop ive attached the correct ones and regened my keys ... fml tower-diagnostics-20230423-0007.zip

that was the diagnostics? unless there is so,this specific in there... i also used the anonymous tick so it shouldn't really put wireguard details in there .... thats a bit of a bad design.

Hi I cant get my Graphics card to Show on the list when trying to set up my Vms. Bios is set up to integrated Graphics (IGD) , fast boot disabled, and UEFI turned off (Cant boot with it on) i do get display though the card some sort of terminal type screen on HDMI 1 and the main IGD DVI port is working on HDMI 2 so they are not showing the same thing. Virtualisation for Intel is enabled also GPU is not showing up in unraid anywhere either which is odd as it worked on my old setup fine before i changed MB - but again the card is being read in bios so im very confused so it must work for the fact i have some sort of video output and the bios is reading it... so why isnt unraid GPU - AMD Radeon HD 6770 Manufacturer:Intel Corporation Product Name:DQ67SW Version:AAG12527-310 Serial Number:BQSW145000A8 Asset Tag:To be filled by O.E.M. Features:Board is a hosting board Board is replaceable Location In Chassis:To be filled by O.E.M. Type:Motherboard Socket Designation:SKTH Type:Central Family:Core i7 Manufacturer:Intel® Corp. Signature:Type 0, Family 6, Model 42, Stepping 7 Flags:FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version:Intel® Core™ i7-2600K CPU @ 3.40GHz Voltage:1.1 V External Clock:100 MHz Max Speed:3800 MHz Current Speed:3400 MHz Status:Populated, Enabled Upgrade:Socket BGA1155 Serial Number:To Be Filled By O.E.M. Asset Tag:To Be Filled By O.E.M. Part Number:To Be Filled By O.E.M. Core Count:4 Core Enabled:4 Thread Count:8 Characteristics:64-bit capable

Cant get the vm to work through graphics card any ideas ?

Any ideas why all my devices excluding my Samsung phones and tablets will work fine but Samsungs come up with no internet when pihole or adguard are on I had no issue with it running on a PI directly.

gave up in the end and built the system again must of been a corrupted usb

Does anyone have a set of instructions for installing a vm for gaming. What are the the best settings to fun so off a graphics card... is it peg or the other one, what do I set the shared memory to .... I tried following the OLD video from space invader but I couldn't get it to work.

Ive Restarted everything today and nothing changed, ive mad sure everything is "moved" im just running a parity check. Ive done a test on the Cache drive to make sure there are no errors but it is still happening . i cant find Iperf but appently its built in?

mercia-nas-diagnostics-20230325-1543.zip mercia-nas-syslog-20230325-1544.zip

this is the Main issue, its takign its sweet a** time doing this and i cant access the Nas from any other tab its completely kills it.

i have a 500MB connection and have tested no issues with Network. If it helps it started from a powercut last night?