Outfielder301

New Cables work well, thanks

Thank you, i will try that. Could you tell me how you determined the mode of the HBA?

Hello, Unraid cant find my drives. This is my first NAS/Unraid Install. I have attached the Diagnostic zip. Unraid Version: 6.11.5 My Hardware: Mobo: Asus Strix X570-F HBA: Dell Perc H310 Cable HBA<->Disks: 2x Inter-Tech SFF-8087 to 4x S-ATA, cross-over Disks: 6x Seagate Ironwolf 4TB (ST4000VN006) What I have tried so far: Check if Disks are ok: yes, if i connect them directly to the Mobo they are all detected Is HBA detected: seems like it; In "Tools->System Devices->PCI Devices and IOMMU Group" this is listed: 0a:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03) BIOS Boot Settings: - CSM: Enabled - Boot Device Control: UEFI and Legacy OPROM Installed the "CA Fix Common Problems" Plugin I tried checking if the H310 Controller is in IT mode but i cant find anything that tells me that. I have a second H310 that gives me the option after boot to go into the RAID configuration, the one currently installed does not. After POST-ing Unraid boots up. With my limited knowledge, i would say that i have the wrong cables for attaching the Drives. munitionsbox2-diagnostics-20230407-1504.zip