-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
tower-diagnostics-20261026-1213.zip I think everything is done now, not seeing much movement on any of the drives anymore.
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
Payment sent - The dives are balancing now (I think? not sure how to check, but I see device 1 reading, and both drives writing). Once the activity dies down and it appears completed I'll post diags to confirm everything - thanks for your help and patience! Also was able to swap cable, server booted without any CRC errors!
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
I have seen the CRC errors, unfortunately all of the SATA in my PC ATM are being used. Is there any risk of harm or damage from the bad cable/CRC errors to the dive (or anything else)? I'd have to do some cable management, but if it has the potential to cause damage I'd def do it, but I'm afraid if i start moving this around and plugging/unplugging the mess I made inside the server I'll mess something up and cause more issues >< (Google seems to say it can degrade network performance and cause data retransmissions, but doesn't mention damage). Is http://paypal.me/blackjohnnie still a good way to tip?
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
Thanks so much for being patient, understood! Array back online with the single device. tower-diagnostics-20261026-0808.zip Attaching diagnostics before adding second device
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
After restating the machine and replacing the drives, i was trying to create the new pool, but ran into the error above, should i have selected "Add Pool" instead?
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
After removing the old drive when i try to bring the array back online with only one device I'm still getting this error: I am checking this checkbox when attempting: It also woun't let me change the "slots" down to 1 here:
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
Just finished with the balance and the btrfs device remove missing /mnt/cache ran without issue. Just to make sure I understand your instructions: Then stop the array and import the pool with the remaining device: I should shut down my server, remove the old SSD, and replace it. on main click on the first device for that pool and then "remove pool" Once the array is started remove the cache pool entirely back on main, create a new pool with the same name and 1 slot Create a new pool with one slot, using the old good SSD. assign the good pool device (cache2), leave the filesystem set to auto take array offline, change cache pool size to 2, set newly added SSD as second drive start the array to import the pool Start array again and parity will build itself Am i understanding all that correctly? Again really appreciate your help here.
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
got it, running now, I think i inadvertently canceled it when trying to ctr copy out the warning message. Also to loop back to the beginning you said "assign the good pool device (cache2)" but if I'm understanding the GUI right it's cache 1 that is healthy, do the diagnostic indicate otherwise?
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
tower-diagnostics-20261023-0927.zip
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
Sorry linux and unraid noob, does that mean i need to type "--force" then the "btrfs balance start -f -dconvert=single,soft -mconvert=dup,soft /mnt/cache" string? or there there are command to confirm and continue? Very much appreciate your help here!
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
When attempting to run "btrfs balance start -f -dconvert=single,soft -mconvert=dup,soft /mnt/cache" im getting: "Conversion with missing device(s) can be dangerous. Please use 'btrfs replace' or 'btrfs device remove' instead. Safety timeout skipped due to --force" Also above you mention removing the first device, and leaving cache2, but the GUI seems to show cache2 being offline:
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
tower-diagnostics-20261023-0753.zip Replace the old drive to get the array to boot, this is with the DEGRADED drive online, replacement drive has been removed ATM.
-
Replacing a failed pool device, trying to replace and rebuild parity - noob help
Bumping - would be more than willing to tip/pay if anyone can help me get this figured out!
NewGuyEddie
Members
-
Joined
-
Last visited