tea_doe

I bought a new old server. An HPE Proliant dl380 Gen10. It came with 8 hard drives. So far, I have only been able to see the same 4 drives. I removed the working drives, added a new used LSI Raid card, and I cannot get these drives to work. I see them listed in the system devices at the bottom under SCSI drives, but there is no size next to them. Anyone have recommendations or experience with this? I know the bays are fine. The 4 working drives work in both the top and bottom bays. I just cannot get these 3 drives to show up. I did see them for a moment in the drive list, but they were embedded under one of the working drives. When I deleted them to see if they would come back on their own, they did not. There was no size on them at that point either. SCSI Devices [0:0:0:0]disk Generic- SD/MMC CRW 1.00 /dev/sda - [1:0:0:0]disk SanDisk Cruzer Glide 1.00 /dev/sdb 30.7GB [2:0:0:0]disk HGST HUS726060AL4210 ADD5 /dev/sdc - [2:0:1:0]disk SEAGATE ST4000NXCLAR4000 GS22 /dev/sdd - [2:0:2:0]disk HGST HUS726060AL4210 ADD5 /dev/sde - [2:0:3:0]disk SEAGATE ST4000NXCLAR4000 GS22 /dev/sdf - homeserver-diagnostics-20230728-1428.zip