dondong

thank you for reply

那就是说，如果我用手机操作文件传输，数据在设备2和3之间转移，还是要经过手机？

Problem solved when I replaced the operating device with wired network,The operating device (device 1) was wireless network initially, the Unraid server (device 2) and another LAN device for data transfering (device 3) were both wired networks.but i still feel strange. why this problem result of device 1's wireless network? Shouldn't it just be a device that issues operating instructions? is the data going through device 1?does that mean the speed will still be 10MB/s when i operate with my moblephone?

问题解决了，我操作unraid服务器的电脑（设备1）是无线网络，unraid（设备2）和需要传输文件的设备（设备3）都是有线网络，我把操作设备1换成了有线恢复正常速度了，不过我还是觉着奇怪，这关设备1啥事？它不应该只是下发操作指令的电脑吗？难道数据要通过设备1? 另外，我还想问大佬一个问题，听说较验盘加磁盘阵列的方式慢，那么磁盘位置留一个硬盘，其余硬盘采用zfs缓存阵列形式是不是目前unraid最优解？

My device is the latest Intel chip N100 x86p5, with 16g of DDR5 memory and three 4t mechanical hard drives , no parity disk set, one 120g SSD ( Sata)for cache. disks read write should be no problem, both can reach 180-200m/sec, two network interfaces, ETH0 and ETH1, only ETH0 is conneted , all device supports Gigabit. eth0 network interface display 1000M (1000m/pbs, full duplex, mtu1500), static IP,shared by SMB, now the transmission speed from other LAN devices to Unraid device is too slow, only 10m. Help me tower-diagnostics-20230818-0801.zip.zip

我是畅网最新的intel 芯片n100 x86p5的主机，16g的ddr5内存，三个4t的机械硬盘挂在到磁盘位，没有设置奇偶校验盘，还有一个固态sata口的120g的ssd做缓存，磁盘读写测试应该没问题，都能达到180-200m/sec，网络接口两个，eth0和eth1，eth1未接入网络，eth0接入，家里宽带肯定支持千兆。千兆光猫，路由，和网线，eth0网口显示1000M（1000m/pbs，full duplex，mtu1500），网络设置的静态ip，域网内通过smb共享，由其他局域网设备拷贝文件到unraid设备局传输速度太慢，只有10几M，求助，急！ tower-diagnostics-20230818-0801.zip.zip