@ich777 我的电脑主板的I/O芯片是 fintek F81966AB，使用Dynamix System Temperature插件无法显示主板温度及风扇转速。 应该是没有驱动的原因，请问如何解决呢，如何正确的添加这个芯片的驱动？ root@Tower:~# sensors-detect --auto # sensors-detect version 3.6.0 # Board: ASRock Industrial IMB-X1314 # Kernel: 6.12.24-Unraid x86_64 # Processor: 12th Gen Intel(R) Core(TM) i5-12500 (6/151/5) Running in automatic mode, default answers to all questions are assumed. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 17h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Hygon Family 18h thermal sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found unknown chip with ID 0x1502 (logical device 4 has address 0x290, could be sensors) Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... Success! (confidence 6, driver `lm78') Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Found unknown SMBus adapter 8086:7aa3 at 0000:00:1f.4. Sorry, no supported PCI bus adapters found. Module i2c-dev loaded successfully. Next adapter: SMBus I801 adapter at efa0 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Client found at address 0x53 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 gmbus dpa (i2c-1) Do you want to scan it? (yes/NO/selectively): Next adapter: i915 gmbus dpb (i2c-2) Do you want to scan it? (yes/NO/selectively): Next adapter: i915 gmbus dpc (i2c-3) Do you want to scan it? (yes/NO/selectively): Next adapter: i915 gmbus tc1 (i2c-4) Do you want to scan it? (yes/NO/selectively): Next adapter: i915 gmbus tc2 (i2c-5) Do you want to scan it? (yes/NO/selectively): Next adapter: i915 gmbus tc3 (i2c-6) Do you want to scan it? (yes/NO/selectively): Next adapter: i915 gmbus tc4 (i2c-7) Do you want to scan it? (yes/NO/selectively): Next adapter: i915 gmbus tc5 (i2c-8) Do you want to scan it? (yes/NO/selectively): Next adapter: i915 gmbus tc6 (i2c-9) Do you want to scan it? (yes/NO/selectively): Next adapter: AUX USBC2/DDI TC2/PHY C (i2c-10) Do you want to scan it? (yes/NO/selectively): Next adapter: AUX USBC4/DDI TC4/PHY E (i2c-11) Do you want to scan it? (yes/NO/selectively): Now follows a summary of the probes I have just done. Driver `lm78': * ISA bus, address 0x290 Chip `National Semiconductor LM78' (confidence: 6) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): To load everything that is needed, add this to one of the system initialization scripts (e.g. /etc/rc.d/rc.local): #----cut here---- # Chip drivers modprobe coretemp modprobe lm78 /usr/bin/sensors -s #----cut here---- You really should try these commands right now to make sure everything is working properly. Monitoring programs won't work until the needed modules are loaded. Unloading i2c-dev... OK
