Everything posted by Atilla0406
-
[6.12.9] disks missing
I see new update is released and it reverts to an earlier version of Linux kernel, given my issue before is it safe to update ?
-
[6.12.9] disks missing
thank you
-
[6.12.9] disks missing
oh ok so for time being would you advise i stick with 6.12.8 until a fix is released ?
-
[6.12.9] disks missing
this is log from 6.12.8 attila-diagnostics-20240329-1405.zip
-
[6.12.9] disks missing
sorry didnt see u need log from previous update , log from 6.12.9 attila-diagnostics-20240329-1355.zip
-
[6.12.9] disks missing
will do thank you, coming from 6.12.8
-
[6.12.9] disks missing
apologies about that
-
[6.12.9] disks missing
i did upgrade my license recently from basic to pro , could that be the cause of it. I've downgraded now got my array set back up , server is not easily accessible right now
-
[6.12.9] disks missing
Upon updating two of my disks vanished on gui but were showing via bios, to resolve I downgraded and it began to show those disks
-
Unable to Auto Boot , Manually every time
before moving onto new flash drive, i backed up the old one and wiped data as did unraid usb creator tool . But it still failed to auto boot , with the new one as u advised i copied the config folder over from old one it auto booted in a matter of seconds
-
Unable to Auto Boot , Manually every time
the problem was the flash drive, I've transfered license over to new flash drive. Thanks all for the help
-
Unable to Auto Boot , Manually every time
So even if the flash drive shows healthy , you would still recommended to try an alternative flash drive? How do I transfer my license over, in terms of backing up do I then copy over backed up data to the new flash drive
-
Unable to Auto Boot , Manually every time
ok will do thank you, does Diagnostics show any issues ?
-
Unable to Auto Boot , Manually every time
yes i had to manually boot attila-diagnostics-20240223-0014.zip
-
Unable to Auto Boot , Manually every time
update notes show this "This update includes the patch for the LogoFAIL vulnerabilities Updating this BIOS will simultaneously update the corresponding Intel ME to version 16.1.30.2307v4. Please note after you update this BIOS, the ME version remains the updated one even if you roll back to an older BIOS later."
-
Unable to Auto Boot , Manually every time
i see that asus released a recent stable update for bios PRIME B760M-K D4, would updating the bios fix this issue ?
-
Unable to Auto Boot , Manually every time
sorry i thought it was an updated syslog, I've edited the message with today's syslog. flash backup ? am not sure if i do
-
Unable to Auto Boot , Manually every time
Just did a recent reboot , and the message i see before going to bios is "GPT header corruption has been detected, please check SATA mode setting in BIOS Setup, or you can use [Boot Sector (MBR/GPT) Recovery Policy] item under [Boot Configuration] page to recovery GPT header. Press F1 to run SETUP" syslog.txt
-
Unable to Auto Boot , Manually every time
thank you , i had thought this could be the problem
-
Unable to Auto Boot , Manually every time
as i said i have done that previously before moving to unraid , with the screenshot i shared I'm wondering if Permit UEFI boot mode should be ticked
-
Unable to Auto Boot , Manually every time
-
Unable to Auto Boot , Manually every time
previously i did try alternative usb , also tried ubuntu prior. Unraid server itself has been up and running since December
-
Unable to Auto Boot , Manually every time
yep
-
Unable to Auto Boot , Manually every time
i did try it disabled as well but same issue , boot device selection page shows only the usb that i use and nothing else
-
Unable to Auto Boot , Manually every time
Hi , every-time when i restart my server or unraid is updated and it then advises me to reboot , it does not auto boot unless i manually force boot. Motherboard - PRIME B760M-K D4 (Updated Wed 2 Aug 2023) What I've tried is the following below 1. Disable "Fast Boot" and try again 2. If that doesn't work, in "Settings > Advanced > USB Configuration" set "XHCI Hand-off" to "Disabled" and "Legacy USB Support" to "Auto" and try again 3. If it still doesn't work, try to tweak the booting options to enable UEFI booting/Secure Boot and be sure that you're booting the Unraid USB drive in UEFI mode (rename "EFI-" folder to "EFI").