betweenchaosandshape

Hi all. I've read through most of this thread, but I'm still having trouble. I'm running the binhex-plex image of Plex 1.40.1.8227 on Unraid 6.12.9 running on Topton motherboard with Intel N5105. I have the INTEL-GPU-TOP and GPU Statistics plugins installed. The Unraid OS portion of my /boot/syslinux/syslinux.cfg file: label Unraid OS menu default kernel /bzimage append i915.enable_fbc=1 i915.enable_guc=2 append initrd=/bzroot The contents of my /boot/config/modprobe.d/i915.conf file: options i915 enable_fbc=1 enable_guc=2 After adding those, as specified in a previous post, I rebooted my server and I then had the /dev/dri directory. I added the device to my Plex config and when I loaded Plex, I was able to select my Jasper Lake GPU as the transcoder. I thought everything was going great until I found that media is buffering a lot whenever I have "Use hardware-accelerated video encoding" checked. - Without that box checked, media plays without issue, but is heavy on my CPU. Running intel-gpu-top shows that the "Video" engine is working heavily, but no other engines are active. Dashboard shows that hardware transcoding is only taking place on decoding. - With it checked, the CPU utilization goes down significantly, but I get a lot of buffering. Running intel-gpu-top shows that the "Video" and "VideoEnhance" engines are both active. Dashboard shows that hardware transcoding is taking place on both decoding and encoding Subtitle burn-in isn't an issue, as I've confirmed the same behavior when subtitles are used with external SRT and when they're off completely. I'm not sure what other info to provide. Any help would be much appreciated. Thanks!

Thank you for doing this. I installed the Tailscale plugin, but I can't access my Unraid server for some reason. I have my phone, my laptop, and my Unraid server logged into my Tailscale account. All three are connected and showing connected in the web console. I can ping my phone from my computer, and vice versa. But I can't ping or get to the web UI for Unraid from either device. I tried to leave all of the settings on the defaults. Not using an exit node or any subnet routes. I only want devices connected to Tailscale to be able to communicate with each other. Do you see anything obvious in the diagnostic logs that gives you an idea what I'm doing wrong? SERENITY-tailscale-diag-20240309-072301.zip