DeadPixel

Super, thank you for sorting that

seem to be having trouble getting InspIRCd set up. Hopefully I'm just missing something obvious but after filling out at the details I get the following error and the docker wont start. [*] Module file could not be found: m_userip.so I tried disabling that module and it proceeded but then gave errors relating to ssl.

I would not really know where to start there, plus generally when I start poking things start breaking!! I see the following in the logs it87: it87 driver version v1.0-154-gf40148e.20240401 [ 77.262609] it87: Found IT8688E chip at 0xa40, revision 1 [ 77.262857] it87: Beeping is supported [ 77.266773] it87: Found IT8792E/IT8795E chip at 0xa60, revision 3 [ 77.266919] it87: Beeping is supported unless there is a simple way to force it to only use the first one and ignore the second, I will forget about it!

Aside from the 2 sets of data being reported everything seems fine. Unraid had been up around 12 hours without any problems and sensors seem to be updating ok so I think it might just be something to ignore 🙂

Yes. I also tried removing the plugin, rebooting, unloading the drivers from the system temp gui, installing the plugin again and rebooting.

I was having trouble with the IT87 drivers with my gigabyte z390 aurous pro mothboard not showing fan speeds. After having a look around I loaded the ITE IT87 Driver plugin. This seems to have done the trick and the fans are now visable which is great. Looking at the output of the "sensors" command it nearly looks like the old driver is also loaded as both of the following is visable: it8792-isa-0a60 Adapter: ISA adapter in0: 858.00 mV (min = +0.00 V, max = +2.81 V) in1: 660.00 mV (min = +0.00 V, max = +2.81 V) in2: 1.14 V (min = +0.00 V, max = +2.81 V) +3.3V: 3.39 V (min = +0.00 V, max = +5.61 V) in4: 1.29 V (min = +0.00 V, max = +2.81 V) in5: 1.52 V (min = +0.00 V, max = +2.81 V) in6: 2.81 V (min = +0.00 V, max = +2.81 V) ALARM 3VSB: 3.37 V (min = +0.00 V, max = +5.61 V) Vbat: 3.26 V temp1: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: -55.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp3: +31.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor intrusion0: ALARM it8688-isa-0a40 Adapter: ISA adapter in0: 828.00 mV (min = +0.00 V, max = +3.06 V) in1: 2.00 V (min = +0.00 V, max = +3.06 V) in2: 2.03 V (min = +0.00 V, max = +3.06 V) in3: 2.03 V (min = +0.00 V, max = +3.06 V) in4: 0.00 V (min = +0.00 V, max = +3.06 V) in5: 1.32 V (min = +0.00 V, max = +3.06 V) in6: 1.37 V (min = +0.00 V, max = +3.06 V) 3VSB: 3.38 V (min = +0.00 V, max = +6.12 V) Vbat: 3.17 V Array Fan: 644 RPM (min = 0 RPM) Array Fan: 1015 RPM (min = 0 RPM) temp1: +28.0°C (low = +127.0°C, high = +127.0°C) sensor = disabled temp2: +32.0°C (low = +127.0°C, high = +127.0°C) sensor = disabled temp3: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI temp4: +35.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp5: +35.0°C (low = +0.0°C, high = -123.0°C) sensor = thermistor temp6: -55.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor intrusion0: ALARM I just wanted to check this is normal as I don't want any system stabiity issues from multiple drivers pulling the same data? Thanks