sleepers

The fun continues... Megarec doesn't see my card, so at a stand still. Oh and I did check, the card is listed in my device manager, so it's there. Ideas?? Jason

Thanks... I'm away form home for the wknd. As soon as I get back I'll give it a go. Jason

LSI2008 controller, I tried the P10,P11,& P7 installs. All 3 return the same error "no LSI adapter found". I'm using the 32 bit installer package to match Win 7 32 bit OS.

I followed the instruction listed on post, but have hit a roadblock...Sure its something simple, but I'm lost. Equipment: LSI 9212 4i4e card Trying to flash on Win 7 32 bit using 2008 chipset(either P10 or P11). Then card is present under Device manager (listed as LSI adapter, SAS2008 Falcon-Storport) with up to date driver. However when runnning List Sdapter under then Flash utility I get "no LSI adapter found" Any ideas?? Thanks Jason

Tom, had this posted in 5.0rc forum & was instructed to post over here... Alright, quick question for the guru's. I'm doing a new build with old server grade equipment. The build is an old HP Proliant DL380 G5. The onboard network is a dual port broadcom netxtreme. Here's the issue, the network works fine under build 4.7 but will not issue an IP under either 5.12 or 5.13. I have tried ifconfig for both eth0 & eth1, disabling both ports individually in the BIOS, disabling usb 2.0. I'm attaching syslogs for all three builds. Thanks in advance Jason Here is it loading the driver: Code: [select] Jun 4 15:22:43 Tower kernel: bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012) And here'a where the problem occurs: Code: [select] Jun 4 15:22:43 Tower logger: /etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1 Jun 4 15:22:43 Tower logger: /etc/rc.d/rc.inet1: /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo Jun 4 15:22:43 Tower logger: /etc/rc.d/rc.inet1: Polling for DHCP server on interface eth0: Jun 4 15:22:43 Tower logger: /etc/rc.d/rc.inet1: /sbin/dhcpcd -t 10 -h Tower -L eth0 Jun 4 15:22:43 Tower dhcpcd[1082]: version 5.2.7 starting Jun 4 15:22:43 Tower kernel: bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.3.fw" Jun 4 15:22:43 Tower dhcpcd[1082]: eth0: up_interface: No such file or directory Jun 4 15:22:43 Tower dhcpcd[1082]: forked to background, child pid 1084 Jun 4 15:22:43 Tower dhcpcd[1084]: eth0: waiting for carrier Looks like a kernel issue based on this: www.spinics.net/lists/netdev/msg219373.html Post this in the RC-13 thread so Tom sees it and maybe he can look into it further. syslog4-7.txt syslog5-12.txt syslog5-13.txt

Alright, quick question for the guru's. I'm doing a new build with old server grade equipment. The build is an old HP Proliant DL380 G5. The onboard network is a dual port broadcom netxtreme. Here's the issue, the network works fine under build 4.7 but will not issue an IP under either 5.12 or 5.13. I have tried ifconfig for both eth0 & eth1, disabling both ports individually in the BIOS, disabling usb 2.0. I'm attaching syslogs for all three builds. Thanks in advance Jason syslog4-7.txt syslog5-12.txt syslog5-13.txt