grizzlemt

Thank you so much for your help! I can take it from here. I appreciate it!

But honestly - I may just skip this cache idea and just use my strange version of a ZFS cache - later ill get bigger SSDs to use as a proper cache. I am a bit worried about that NVME though - does that mean its borked and no longer works?

Something borky is happening with that. Now its unassigned the NVME Ansible Diagnostics 20240720 (1).zip

Okay I decided to try formatting! It worked on the ZFS Cache - but not the cache itself. Disk /dev/nvme0n1: 894.25 GiB, 960197124096 bytes, 1875385008 sectors Disk model: Force MP510 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 65.8M 1 loop /lib loop1 7:1 0 373.6M 1 loop /usr loop2 7:2 0 20G 0 loop /var/lib/docker/btrfs /var/lib/docker loop3 7:3 0 1G 0 loop /etc/libvirt sda 8:0 1 14.3G 0 disk └─sda1 8:1 1 14.3G 0 part /boot sdb 8:16 0 16.4T 0 disk └─sdb1 8:17 0 16.4T 0 part sdc 8:32 0 14.6T 0 disk └─sdc1 8:33 0 14.6T 0 part sdd 8:48 0 7.3T 0 disk └─sdd1 8:49 0 7.3T 0 part sde 8:64 0 16.4T 0 disk └─sde1 8:65 0 16.4T 0 part sdf 8:80 0 7.3T 0 disk └─sdf1 8:81 0 7.3T 0 part sdg 8:96 0 7.3T 0 disk └─sdg1 8:97 0 7.3T 0 part sdh 8:112 0 16.4T 0 disk └─sdh1 8:113 0 16.4T 0 part sdi 8:128 0 16.4T 0 disk └─sdi1 8:129 0 16.4T 0 part sdj 8:144 0 16.4T 0 disk └─sdj1 8:145 0 16.4T 0 part sdk 8:160 0 18.2T 0 disk └─sdk1 8:161 0 18.2T 0 part sdl 8:176 0 10.9T 0 disk └─sdl1 8:177 0 10.9T 0 part sdm 8:192 0 232.9G 0 disk └─sdm1 8:193 0 232.9G 0 part sdn 8:208 0 111.8G 0 disk └─sdn1 8:209 0 111.8G 0 part sdo 8:224 0 223.6G 0 disk └─sdo1 8:225 0 223.6G 0 part md1p1 9:1 0 16.4T 0 md /mnt/disk1 md2p1 9:2 0 16.4T 0 md /mnt/disk2 md3p1 9:3 0 16.4T 0 md /mnt/disk3 md5p1 9:5 0 16.4T 0 md /mnt/disk5 md6p1 9:6 0 14.6T 0 md /mnt/disk6 md9p1 9:9 0 10.9T 0 md /mnt/disk9 nvme0n1 259:0 0 894.3G 0 disk nvme1n1 259:2 0 1.9T 0 disk └─nvme1n1p1 259:3 0 1.9T 0 part nvme2n1 259:4 0 1.9T 0 disk └─nvme2n1p1 259:5 0 1.9T 0 part /mnt/appcache I just re-ran the commands you asked me for earlier - just in case that helps and reprinted a diagnostic Ansible Diagnostics 20240720 (3).zip

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 65.8M 1 loop /lib loop1 7:1 0 373.6M 1 loop /usr loop2 7:2 0 20G 0 loop /var/lib/docker/btrfs /var/lib/docker loop3 7:3 0 1G 0 loop /etc/libvirt sda 8:0 1 14.3G 0 disk └─sda1 8:1 1 14.3G 0 part /boot sdb 8:16 0 16.4T 0 disk └─sdb1 8:17 0 16.4T 0 part sdc 8:32 0 14.6T 0 disk └─sdc1 8:33 0 14.6T 0 part sdd 8:48 0 7.3T 0 disk └─sdd1 8:49 0 7.3T 0 part sde 8:64 0 16.4T 0 disk └─sde1 8:65 0 16.4T 0 part sdf 8:80 0 7.3T 0 disk └─sdf1 8:81 0 7.3T 0 part sdg 8:96 0 7.3T 0 disk └─sdg1 8:97 0 7.3T 0 part sdh 8:112 0 16.4T 0 disk └─sdh1 8:113 0 16.4T 0 part sdi 8:128 0 16.4T 0 disk └─sdi1 8:129 0 16.4T 0 part sdj 8:144 0 16.4T 0 disk └─sdj1 8:145 0 16.4T 0 part sdk 8:160 0 18.2T 0 disk └─sdk1 8:161 0 18.2T 0 part sdl 8:176 0 10.9T 0 disk └─sdl1 8:177 0 10.9T 0 part sdm 8:192 0 232.9G 0 disk └─sdm1 8:193 0 232.9G 0 part sdn 8:208 0 111.8G 0 disk └─sdn1 8:209 0 111.8G 0 part sdo 8:224 0 223.6G 0 disk └─sdo1 8:225 0 223.6G 0 part md1p1 9:1 0 16.4T 0 md /mnt/disk1 md2p1 9:2 0 16.4T 0 md /mnt/disk2 md3p1 9:3 0 16.4T 0 md /mnt/disk3 md5p1 9:5 0 16.4T 0 md /mnt/disk5 md6p1 9:6 0 14.6T 0 md /mnt/disk6 md9p1 9:9 0 10.9T 0 md /mnt/disk9 nvme0n1 259:0 0 894.3G 0 disk nvme1n1 259:2 0 1.9T 0 disk └─nvme1n1p1 259:3 0 1.9T 0 part nvme2n1 259:4 0 1.9T 0 disk └─nvme2n1p1 259:5 0 1.9T 0 part /mnt/appcache

root@Ansible:~# blkdiscard -f /dev/nvme0n1 blkdiscard: Operation forced, data will be lost! root@Ansible:~# I dont know how to force it to do it? Disk /dev/nvme0n1: 894.25 GiB, 960197124096 bytes, 1875385008 sectors Disk model: Force MP510 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Maybe it did? I can't tell! hah

Disk /dev/nvme0n1: 894.25 GiB, 960197124096 bytes, 1875385008 sectors Disk model: Force MP510 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/nvme0n1p1 2048 1875385007 1875382960 894.3G 83 Linux Yes it does!

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 65.8M 1 loop /lib loop1 7:1 0 373.6M 1 loop /usr loop2 7:2 0 20G 0 loop /var/lib/docker/btrfs /var/lib/docker loop3 7:3 0 1G 0 loop /etc/libvirt sda 8:0 1 14.3G 0 disk └─sda1 8:1 1 14.3G 0 part /boot sdb 8:16 0 16.4T 0 disk └─sdb1 8:17 0 16.4T 0 part sdc 8:32 0 14.6T 0 disk └─sdc1 8:33 0 14.6T 0 part sdd 8:48 0 7.3T 0 disk └─sdd1 8:49 0 7.3T 0 part sde 8:64 0 16.4T 0 disk └─sde1 8:65 0 16.4T 0 part sdf 8:80 0 7.3T 0 disk └─sdf1 8:81 0 7.3T 0 part sdg 8:96 0 7.3T 0 disk └─sdg1 8:97 0 7.3T 0 part sdh 8:112 0 16.4T 0 disk └─sdh1 8:113 0 16.4T 0 part sdi 8:128 0 16.4T 0 disk └─sdi1 8:129 0 16.4T 0 part sdj 8:144 0 16.4T 0 disk └─sdj1 8:145 0 16.4T 0 part sdk 8:160 0 18.2T 0 disk └─sdk1 8:161 0 18.2T 0 part sdl 8:176 0 10.9T 0 disk └─sdl1 8:177 0 10.9T 0 part sdm 8:192 0 232.9G 0 disk └─sdm1 8:193 0 232.9G 0 part sdn 8:208 0 111.8G 0 disk └─sdn1 8:209 0 111.8G 0 part sdo 8:224 0 223.6G 0 disk └─sdo1 8:225 0 223.6G 0 part md1p1 9:1 0 16.4T 0 md /mnt/disk1 md2p1 9:2 0 16.4T 0 md /mnt/disk2 md3p1 9:3 0 16.4T 0 md /mnt/disk3 md5p1 9:5 0 16.4T 0 md /mnt/disk5 md6p1 9:6 0 14.6T 0 md /mnt/disk6 md9p1 9:9 0 10.9T 0 md /mnt/disk9 nvme0n1 259:0 0 894.3G 0 disk └─nvme0n1p1 259:1 0 894.3G 0 part nvme1n1 259:2 0 1.9T 0 disk └─nvme1n1p1 259:3 0 1.9T 0 part nvme2n1 259:4 0 1.9T 0 disk └─nvme2n1p1 259:5 0 1.9T 0 part /mnt/appcache

Here they are! Thank you so incredibly much for helping me. Ansible Diagnostics 20240720 (2).zip

I am wondering if I should just wipe and redo the whole server? it'd be a shame to do so, but I had changed some of the configs of the hdds to try to reorient stuff, and its been a bit sketchy ever since. I did the process of making a 'new config' and then starting into that new config, and its been running in this loop ever since.

I couldnt get anything from the second command

Ansible Diagnostics 20240720.zip I have restarted the server twice -- but I keep getting the same problems. Is there anything else i can look at that's causing this? Thanks!

Hey folks, I am trying to make a zsf pool that's just a stripe pool to handle downloads I am doing. I started formatting them to do this 2 days ago - but its sitting and formatting. Is there something going on thats stopping this? what am I missing? Thanks Ansible Diagnostics 20240719.zip