cmoney

Yes sir that is correct.

root@Unraid:~# zfs list -t all NAME USED AVAIL REFER MOUNTPOINT pool_256gb 23.0G 208G 96K /mnt/pool_256gb pool_256gb/docker 22.9G 208G 22.9G /mnt/pool_256gb/docker pool_40tb 12.2T 24.0T 240K /mnt/pool_40tb pool_40tb/documents_colin 2.23G 24.0T 2.23G /mnt/pool_40tb/documents_colin pool_40tb/downloads 9.20G 24.0T 9.20G /mnt/pool_40tb/downloads pool_40tb/media 12.2T 24.0T 12.2T /mnt/pool_40tb/media pool_40tb/software 192K 24.0T 192K /mnt/pool_40tb/software pool_40tb/sync 192K 24.0T 192K /mnt/pool_40tb/sync pool_40tb/sync_backup 4.09G 24.0T 4.09G /mnt/pool_40tb/sync_backup pool_40tb/urbackup 52.2M 24.0T 52.2M /mnt/pool_40tb/urbackup temp_pool 820K 21.0T 140K /mnt/temp_pool

will do, thanks

Okay great. If I create the new pool and send you photos would you be willing to send the commands?

If that doesn't work then my next plan is the one I outlined yesterday with a slight twist. I was hoping to get new 12TB drives but that is out. I do have on hand a bunch of 8TB drives so my new plan is to create a new temporary pool with the 8TB drives. Then use the commands you offered to send to replicate the shares over to the temp pool. After that reformat the old raidz2 into a new raidz with only 4 drives. Then use the same commands to move the data back from the temp pool to the new pool on the raidz. Would that work?

Okay so the plan has changed slightly, and any help you can give me would be great. So I need to switch from a case with an 8-drive bay to a case with a 4-drive bay. In an ideal world, I would just somehow convert my current 6 drive raidz2 to a 4 drive raidz1. Is there any way to do this without reformatting and losing the data?

I have another quick question if you don't mind. I'm thinking about switching my hardware around and going from a 6 10TB drive raidz2 to a 4 12TB drive raidz1. Is there a simple way to migrate the shares and pool data?

Check your Paypay for a tip/beer. From DarkOmen44z. Thanks again, Cheers!

It looks like its resilvering

I think we are making progress

Yes I ran that command but it doesn't seem to give any feedback on if it was successful or not

OKay now im getting this "cannot replace 7931583891141304603 with /dev/sdg1: already in replacing/spare config; wait for completion or use 'zpool detach'"

Roger that. I did it with the array started and The first command was fine. The second is kicking out this. "cannot remove /dev/sdg1: Pool busy; removal may already be in progress"

Should I stop the array to do this?