Tirti

On my side nothing changed. Still the same slow SMB speed.

Internal / Local Performance growes up to 140-147 mb/s but SMB Performance is still the same

I switched the HDDs to 2x ST4000VN006 so everyting should be fine in basics. Fresh and unused Hdds with good Performace and its still the same. For me it looks like there must be a Software problem, or the SATA Ports of my Ugreen DXP6800 Pro are on an other Controller then my Nvme´s because if i do exactly the same thing from my cache (WD_BLACK_SN850X_1000GB) it runs like hell. Any Hints or things i can try? Dont have any other ideas 😞

Alle the drives has the near Same Performance somewhere between 81-97mbs. Anyway on smb read I Never reach more than the half

My first thoughts with plugins seems wrong. i am not sure why my transfer speed is so slow Networks seems good After i done those test i copy files from unraid to this client 20GB with 30mb/s 😞

that I mean. The read Speed to the Client is pretty poor. Will try to Write some files to Array but my Main Problem is the read Speed from smb UPDATE: Writeing on SMB is the same, seems maxed by 40mb/s

I already set configuration to "Turbo Mode" the speed is the same. If. only copy files from one drive the transfer speed slow down to stable 40MB/s. From Nvme Cache its possible to copy with 112MB/s near the maximum of my 1Gbit Network

HI, i use 5x ST4000LM024-2AN17V_WFG0NV2C (sde) and 1x WDC_WD40EFRX-68N32N0_WD-WCC7K0KJXL2P (sdd) as Parity HDD. My Array is a normal XFS Array with one Share on it. I also use 2x WD_BLACK_SN850X_1000GB_24129G4A1J04 (nvme1n1) as Cache with btrfs. My CPU is an Intel i5 1235U and i use 40GB RAM the other Nvme´s are not important. If i copy files internal or from cache i can copy wit up to 140MB/s (think max my HDDs can reach) But if i copy over SMB i only get 40 max 50MB/s Any ideas why this happens? Thank you for helping me Tirti